• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Sharkoon Announces REV100 Compact Case

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,847 (7.39/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon is now introducing the latest case to the REV series: the REV100 ATX midi tower. Like its predecessors, it features the same innovative case structure which has made the series so popular. The mainboard mount is rotated by 90 degrees with the tempered glass side panel located on the right-hand side. Because of its more compact size, the REV100 is ideal for smaller desks.

The front panel of the REV100 has a geometric, angular design with a surface which resembles brushed metal. Highlighting the minimalist front panel design are its mesh grid and the RGB LED strip. In addition, the back of the case is illuminated with a pre-installed, addressable RGB LED fan. Both RGB LED components can be correspondingly adjusted using the pre-installed controller.



A Case Configuration with a Difference
Just like its predecessors, the REV100 offers the unique and innovative case design for which the REV series is known. Because the mainboard is mounted rotated by 90 degrees, so are all the other components inside the case. These are thus installed vertically. There is also a compartment under the top panel with plenty of space to neatly stow cables.

Away from the Usual
As a difference to the usual, the inside of the case is not viewed from the left, but from the right. Therefore, the models of the REV series are particularly suitable for being placed on the left side of the desk. Below the tempered glass, there is a black covering so that the view inside is not disturbed by unsightly cables.

A Case Optimized for Airflow
Even though the REV100 is the smallest case of the series, it offers sufficient airflow with an RGB LED fan in the back of the case and another pre-installed 120-millimeter fan at the front. Here, the optimally sized mesh panel contributes to the airflow. In addition, the detachable top cover is perforated, and is thus air permeable. To prevent unwanted dust and dirt, there are removable dust filters behind the front panel and in the bottom panel.

Space-Saving ATX Tower
With dimensions of 45.2 x 21.5 x 44.4 centimeters, the REV100 is compact and fits easily into any setup. Whether on or next to the desk, the REV100 cuts a fine figure everywhere. So that there is enough space for all components despite the small size, the case does without a power supply tunnel.

Price and Availability
The Sharkoon REV100 is now available at the manufacturer's suggested retail price of 64.90 euros.

View at TechPowerUp Main Site
 
That motherboard orientation will sure help alot on GPU's temps, cimney design is the best for air cooled CPU and GPU.

On point with the RTX 3000 series !
 
Feels like these guys debut a new case on a weekly basis.
 
That motherboard orientation will sure help alot on GPU's temps, cimney design is the best for air cooled CPU and GPU.

This is just switched over, it's the same thing in reality. Some of the hot air goes out the top and some out the back.
 
Last edited:
it features the same innovative case structure which has made the series so popular...

 
I wanna like this case, but that front panel looks suffocating and there’re no bottom fan mounts for the 90* orientation... They could’ve at least put a filter on the back panel and added fan mounts...

From the specs:
Fan Configuration
Front Panel: 1x 120 mm fan (pre-Installed) or 2x 120 mm fan (optional) or 2x 140 mm fan (optional)
Rear Panel: 1x 120 mm Addressable RGB Fan (Pre-Installed) or 1x 120 mm fan or Radiator (Optional)
 
Back
Top