Polaris573
Senior Moderator
- Joined
- Feb 26, 2005
- Messages
- 4,268 (0.61/day)
- Location
- Little Rock, USA
| Processor | LGA 775 Intel Q9550 2.8 Ghz |
|---|---|
| Motherboard | MSI P7N Diamond - 780i Chipset |
| Cooling | Arctic Freezer |
| Memory | 6GB G.Skill DDRII 800 4-4-3-5 |
| Video Card(s) | Sapphire HD 7850 2 GB PCI-E |
| Storage | 1 TB Seagate 32MB Cache, 250 GB Seagate 16MB Cache |
| Display(s) | Acer X203w |
| Case | Coolermaster Centurion 5 |
| Audio Device(s) | Creative Sound Blaster X-Fi Xtreme Music |
| Power Supply | OCZ StealthXStream 600 Watt |
| Software | Windows 7 Ultimate x64 |
A professor of mathematics at the University of Rochester named Allan Greenleaf has solved a mathematical problem which could bring electromagnetic wormholes (EMW) into existence. These EMWs would create a full invisibility cloak in a tube which surrounds whatever they were employed to hide. Such devices could eventually be employed to make true 3D TV possible, and without special glasses. Researchers themselves admit this is a long way off from practical application. However, scientists are now theorizing about such things and believe that they are ultimately possible.
In their simplest forms, EMWs are basically tubes. They create a specific type of EM field around an object, one which refracts electromagnetic waves of all frequencies, according to the researchers. The EM radiation continues on from its source as it would've without the tube being there. It would be like an invisible paper towel roll. When you hold it up, the light from behind is refracted around, no matter which way it was turned, producing a true invisibility cloak. These tubes would then be placed in such a way as to surround an object, thereby making the object inside appear invisible. The researchers indicated that the field generated would also cause an odd side effect. If, for example, you were to look in one end of the tube and out the other side, the generated field would produce a fish-eye appearance, or something like an Escher drawing, making the tube's through-image appearance distorted. The scientists were able to take their theory and apply it to practical applications, at least in a mental exercise. For example, micro-surgery in the presence of an MRI system would be possible. Since any tools a surgeon might need to use would greatly distort the MRI field and subsequent display the surgeon would use, the desire to electromagnetically cloak all parts of the tool except for the very tip would be prevalent. This would result in a significantly greater ability for surgeons to see what they'd be doing with greater image quality and accuracy, and in real-time through the MRI. Fewer distortions means potentially life-saving solutions as they guide tools more expertly through computer assistance. Potentially one of the more exciting future aspects of the design would be the 3D TV. Consider fiber optics lights and the bundle of cords which shine the light out from some central source. When the cords are held together they produce a lot of light. Individually however, they are tip lights only which, while sometimes pretty, don't convey a lot of light. Well, for the 3D TV something similar would be used. Imagine an array of toothbrush-like bristles extending up from a projection source. The bristles would be of different lengths, however, fully occupying all points in a cube, each comprising a single dot at a given X/Y/Z coordinate. Rather than just having a pixelated surface image as with traditional TV, layer after layer of pixelated images would be created, each corresponding to a specific layer or slice of the 3D image being projected. Now, using traditional fiber optics cables to achieve this effect is theoretically possible today. However, the cables themselves would quickly get in the way. Anything below the second or third layer would become very difficult to see. The interference from the fibers themselves would distort the light, making it dim and probably completely obstructed below the first few layers. The mathematicians involved in carrying out this research have suggested that by cloaking all of the fiber optic stems from source to tip, all of the emitted light from inside of the cube would be visible, thereby allowing for 3D TV. Rather than the stems obstructing the light from all the 3D pixels, they would simply carry the light around the EMWs straight to the eye. One of the researchers described it as "a thousand pixels suspended in mid air." They admit it's a long ways off, but mathematically it is possible, and it is something they're thinking of.
View at TechPowerUp Main Site
In their simplest forms, EMWs are basically tubes. They create a specific type of EM field around an object, one which refracts electromagnetic waves of all frequencies, according to the researchers. The EM radiation continues on from its source as it would've without the tube being there. It would be like an invisible paper towel roll. When you hold it up, the light from behind is refracted around, no matter which way it was turned, producing a true invisibility cloak. These tubes would then be placed in such a way as to surround an object, thereby making the object inside appear invisible. The researchers indicated that the field generated would also cause an odd side effect. If, for example, you were to look in one end of the tube and out the other side, the generated field would produce a fish-eye appearance, or something like an Escher drawing, making the tube's through-image appearance distorted. The scientists were able to take their theory and apply it to practical applications, at least in a mental exercise. For example, micro-surgery in the presence of an MRI system would be possible. Since any tools a surgeon might need to use would greatly distort the MRI field and subsequent display the surgeon would use, the desire to electromagnetically cloak all parts of the tool except for the very tip would be prevalent. This would result in a significantly greater ability for surgeons to see what they'd be doing with greater image quality and accuracy, and in real-time through the MRI. Fewer distortions means potentially life-saving solutions as they guide tools more expertly through computer assistance. Potentially one of the more exciting future aspects of the design would be the 3D TV. Consider fiber optics lights and the bundle of cords which shine the light out from some central source. When the cords are held together they produce a lot of light. Individually however, they are tip lights only which, while sometimes pretty, don't convey a lot of light. Well, for the 3D TV something similar would be used. Imagine an array of toothbrush-like bristles extending up from a projection source. The bristles would be of different lengths, however, fully occupying all points in a cube, each comprising a single dot at a given X/Y/Z coordinate. Rather than just having a pixelated surface image as with traditional TV, layer after layer of pixelated images would be created, each corresponding to a specific layer or slice of the 3D image being projected. Now, using traditional fiber optics cables to achieve this effect is theoretically possible today. However, the cables themselves would quickly get in the way. Anything below the second or third layer would become very difficult to see. The interference from the fibers themselves would distort the light, making it dim and probably completely obstructed below the first few layers. The mathematicians involved in carrying out this research have suggested that by cloaking all of the fiber optic stems from source to tip, all of the emitted light from inside of the cube would be visible, thereby allowing for 3D TV. Rather than the stems obstructing the light from all the 3D pixels, they would simply carry the light around the EMWs straight to the eye. One of the researchers described it as "a thousand pixels suspended in mid air." They admit it's a long ways off, but mathematically it is possible, and it is something they're thinking of.
View at TechPowerUp Main Site
