• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[Case Gallery] CM Cav1 incarnation 3

  • Thread starter Thread starter DiabloAzul126
  • Start date Start date
D

DiabloAzul126

Guest
To view this case mod, go here.



Specs:
Coolermaster Cavalier-1
Intel E6420 @ 3.2GHz
HSF Scythe Ninja Plus Rev.A
XFX 7600GT + Arctic Cooling S2 @ [650/820]
Abit IP35-e
2GB G.skill DDR2-800 + 2GB Ballistix Tracers DDR2-800
Corsair HX520
WD 500AAKS SE16 500GB SATA
LG 18X DVD-RW SATA Drive

Mods:
Added Kama Bay Intake, Swapped out the 80mm front intake fan for a 120mm, Painted interior semi-flat black & front bezel (incl. drives) gunmetal, suspended hard drive after removing the hdd cage. And of course some cable management.

I aimed for a cool and quiet performer, and at 3.2GHz, this thing runs at around 35 idle/55~ load. It's barely audible. The last update I'll perform to this rig is a move to something like an 8800GT(S) and then replace some of the dying case fans with some newer ones like some 500/800RPM Slipstreams.
 
Last edited by a moderator:
Very nice!simple,clean with good cable menangment.
 
To view this case mod, go here.



Specs:
Coolermaster Cavalier-1
Intel E6420 @ 3.2GHz
HSF Scythe Ninja Plus Rev.A
XFX 7600GT + Arctic Cooling S2 @ [650/820]
Abit IP35-e
2GB G.skill DDR2-800 + 2GB Ballistix Tracers DDR2-800
Corsair HX520
WD 500AAKS SE16 500GB SATA
LG 18X DVD-RW SATA Drive

Mods:
Added Kama Bay Intake, Swapped out the 80mm front intake fan for a 120mm, Painted interior semi-flat black & front bezel (incl. drives) gunmetal, suspended hard drive after removing the hdd cage. And of course some cable management.

I aimed for a cool and quiet performer, and at 3.2GHz, this thing runs at around 35 idle/55~ load. It's barely audible. The last update I'll perform to this rig is a move to something like an 8800GT(S) and then replace some of the dying case fans with some newer ones like some 500/800RPM Slipstreams.

Nice, you on SPCP? That looks exactly like what SPCP users would build.
 
Nice, you on SPCP? That looks exactly like what SPCP users would build.
If you mean SPCR. Then yes, I frequent there a lot, rarely post, I don't even remember if I have an account on their forums.

I got most of my ideas for junk to do from there.
 
Nice setup, good cables. Bad video card though. 7/10 from me.
 
If you mean SPCR. Then yes, I frequent there a lot, rarely post, I don't even remember if I have an account on their forums.

I got most of my ideas for junk to do from there.

Yeah my bad, I'd really recommend you install a scythe slipstream rear outake... without that airflow, your Accelero...
 
Yeah my bad, I'd really recommend you install a scythe slipstream rear outake... without that airflow, your Accelero...
I bought a Few Slip Streams (2x 1200RPM and 1x 800RPM), also swapped in an 8800GT with an Accelero S1 (800RPM fan attached to the S1)

I'll eventually post new pics I guess, but all in all, it looks basically the same.
 
Back
Top