Intel Yorkfield Processors Next Week?

[CrAsHnBuRnXp]

It's not natively quad core. It just has a larger cache and tweaked core. The Q9300 also has a much higher fsb meaning that the multiplier is lower.

The hell with that native quad core crap. Its just a marketing gimmick. Like SLi RAM. If you really want to look at it that way, which quad core is better? AMD's "native" quad core, or Intel's "double" dual core? Looks like Intel has been the winner. And dont say that Im a "fanboy" either. Because I buy w/e is best at the time of my purchase. My last 5 builds have been AMD.

No matter how you look at it, so long as it is in one processor, it IS a quad core.

 

[erocker]

The hell with that native quad core crap. Its just a marketing gimmick. Like SLi RAM. If you really want to look at it that way, which quad core is better? AMD's "native" quad core, or Intel's "double" dual core? Looks like Intel has been the winner. And dont say that Im a "fanboy" either. Because I buy w/e is best at the time of my purchase. My last 5 builds have been AMD.

No matter how you look at it, so long as it is in one processor, it IS a quad core.

He was responding to a question, and you post this flame bait post. This is a warning.

 

[Wile E]

Hey Wile E, welcome to the club

youl get 4ghz easy on 1.35+ volts. I game on mine at 430fsbx10.5 multiplier @ 4.5GHz

however, with the QX9650, the fsb wall is not strictly to do with the motherboard, its the chip itself. some have gotten higher fsb's on their chips, mine dont like a v high fsb. I struggle with 440fsb. Tho its possible a bios revision may help with that. the 1004 bios is playing nicely with my cpu, no issues so far.

With an unlocked multi, I'm not too worried about a high fsb. I have 1200Mhz ram, so I'll put it on a higher strap. At 400fsb, I can run my ram at 1200MHz on the dot. I'll just set it to 400fsb, give or take a few Mhz, and play with the multi.

 

[Tatty_Two]

I just bit the bullet, and ordered my QX9650 last night from the egg. These new 9 series quads just don't have any multis I can work with.

I am very Jelous! Tax return or not, I still could not justify that kind of outlay for a "light" hobby but well done to you, makes me need to go SLI even more now as I am not gonna get anywhere near your single card score with the Palit's!

What replacements you getting?......8800GT's again or better and did you have to send the fried ones back cause you can appreciate that from the UK thats a costly business!

 

[Tatty_Two]

since i don't have a quad yet would it be worth getting the q9450? i only want to run it at maybe 3.4 same if i got a q6600.

The Q9450 will be good, I think at even 3.6gig (which probably equates in performance terms to a Q6600 @ 3.7gig), if you are happy with that it should run well and fairly cool and would be a decent investment from say a low to mid ranged duellie although you may be actually better off saving some cash and just going Q9300, you should get a fairly cool and cheap 3.4gig out of that.

 

[Wile E]

I am very Jelous! Tax return or not, I still could not justify that kind of outlay for a "light" hobby but well done to you, makes me need to go SLI even more now as I am not gonna get anywhere near your single card score with the Palit's!

What replacements you getting?......8800GT's again or better and did you have to send the fried ones back cause you can appreciate that from the UK thats a costly business!

No word yet. He only made me send back the 2 that I fried, so I'm guessing more 88GTs.

 

[Tatty_Two]

No word yet. He only made me send back the 2 that I fried, so I'm guessing more 88GTs.

Thanks, I still have the 2 out of 3 working but I have decided I am going SLi so I will run the 2 cards initially without voltmodding them at say 770 core, then maybe voltmod them after.

 

[PaulieG]

IMO the only viable options is the 9550 with the 8.5 multi but TBH, as such high prices, it isnt worth the price difference over the Kentsfield for possibly a max of 100-150mhz core speed.

Completely agree here. At the current asking price for the 9550, it's really not worth upgrading if you've already got yourself a Q6600 or a Xeon x3220, and anything else is really no more than a lateral move.

 

[LiveOrDie]

i'm getting me a Q9550

 

[trt740]

There is gonna be a new stepping QX9650 aswell with an improved FSB

 

[trt740]

I am very Jelous! Tax return or not, I still could not justify that kind of outlay for a "light" hobby but well done to you, makes me need to go SLI even more now as I am not gonna get anywhere near your single card score with the Palit's!

What replacements you getting?......8800GT's again or better and did you have to send the fried ones back cause you can appreciate that from the UK thats a costly business!

I bought one aswell, and intend to play with it a bunch then sell it got it at near a 40 percent discount. The when the Qx9650 is gone I will get my e8500 at a greatly discounted price.

 

[X800]

So now i am very confused what to buy E9450 or Q6600 or even an X3220 (Xeon version of Q6600)duacore? .The E9450 was faster at the same clock ,than the Q6600.And what is would be the limiting factor for me becuse i have no experience of intel systems (overcklocking theese new cpus).All intels i had was ages a go.

 

[trt740]

So now i am very confused what to buy E9450 or Q6600 or even an X3220 (Xeon version of Q6600)duacore? .The E9450 was faster at the same clock ,than the Q6600.And what is would be the limiting factor for me becuse i have no experience of intel systems (overcklocking theese new cpus).All intels i had was ages a go.

Wait and see I'm betting the Q9450 will do atleast 3.8ghz 24/7 making it a better buy than a Q6600 if not the price of both Q6600 and X3220 will drop and you can still buy one of them. I would wait tell next week and see just how much better intel made the FSB of the Q9450. Then decide what to get. The Best deal on a Quad right now is a X3210, X3220 and Q6600 but in a week it may not be. Also some sites have E8500 dual cores they will do 4.5ghz 24/7 on air, and cost 280.00 shipped those are also very good deals for the fastest Dual Core Cpu ever made.

 

[zOaib]

$1k But it was tax money, so it was basically free. lol.

brand new on ebay for 800.00 + free shipping ............ i was lookign at these myself , but cannot justify that huge price for a cpu while mine still kicks ass.

http://cgi.ebay.com/CPU-intel-core-...yZ141323QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[trt740]

brand new on ebay for 800.00 + free shipping ............ i was lookign at these myself , but cannot justify that huge price for a cpu while mine still kicks ass.

http://cgi.ebay.com/CPU-intel-core-...yZ141323QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

yes thats a good deal and a very good seller.

 

[Tatty_Two]

I bought one aswell, and intend to play with it a bunch then sell it got it at near a 40 percent discount. The when the Qx9650 is gone I will get my e8500 at a greatly discounted price.

Barking mad

 

[Tatty_Two]

yes thats a good deal and a very good seller.

Thats so good I am considering buying all 3! nice little profit to be made there, easily sell them for £100 profit per chip over here.

 

[strick94u]

I'm going back to a 478 hyperthreading cpu I'm sick of all this speed.
I want the coolness of hyperthreading.

 

[trt740]

Thats so good I am considering buying all 3! nice little profit to be made there, easily sell them for £100 profit per chip over here.

well to tell the truth I don't intend to keep it anyway, I'm just gonna use it to make my E8500 cheaper. My X3210 went in about 3 hours for 240.00 so I was able to get my money back on it. It was a rare, rare quad all 4 cores read almost identical temps. I haven't ever seen that before, plus it is a little beast did 1.5 ghz oced over the stock clock.

 

[iLLz]

One thing overlooked...

One thing overlooked is that the newer chips will have the SSE4 instruction set. So if you currently don't have a Q6600 the Q9450 and other Yorkfield processors make the most sense. Some video encoding software is starting to take advantage of these instructions and the benchmarks show 40% + drops in encoding time.

So this could benefit anyone who uses a digital camcorder or who simply encode dvds. This is one intriguing aspect of the chip I look forward to most.

- iLLz

 

[Tatty_Two]

well to tell the truth I don't intend to keep it anyway, I'm just gonna use it to make my E8500 cheaper. My X3210 went in about 3 hours for 240.00 so I was able to get my money back on it. It was a rare, rare quad all 4 cores read almost identical temps. I haven't ever seen that before, plus it is a little beast did 1.5 ghz oced over the stock clock.

Yeah, I cant quite manage that accuracy on all 4 cores but still not too bad, just look at the temps at 1.4V at 3.4gig, it's only at that voltage because I was playing around at 3.6gig, she will normally do 3.4 on 1.325V .....with room ambients of 19C.............

 

[MikeJeng]

Are these supposed to be G0?



Somebody told me they were "C1"

 

[wolf2009]

One thing overlooked is that the newer chips will have the SSE4 instruction set. So if you currently don't have a Q6600 the Q9450 and other Yorkfield processors make the most sense. Some video encoding software is starting to take advantage of these instructions and the benchmarks show 40% + drops in encoding time.

So this could benefit anyone who uses a digital camcorder or who simply encode dvds. This is one intriguing aspect of the chip I look forward to most.

- iLLz

that is only if u use divx codec . The codec of the future is H.264 which offers better quality divx at the same bitrate . And it doesn't need sse4 cause its source code(of the x264 encoder) is so well optimized .

 

[freaksavior]

http://www.google.com/products?hl=en&q=Intel+q9450&scoring=p&lnk=next&sa=N&start=0

is it safe to get these from some of the first people because there cheap?

 

[Wile E]

Wait and see I'm betting the Q9450 will do atleast 3.8ghz 24/7

I seriously doubt that. Not because of the chip, but because you are very lucky to find a mobo that will run a quad at 475 fsb 24/7 stable. It's not even about the model of mobo, it's about the individual mobo. Most mobos will only do 400-420fsb stable with a quad. With good ones doing 440-450, and the ungodly ones doing more than that. It's all about the luck of the draw. If it were me, I'd rather take my chances on the higher multi of the Q6600, unless I already confirmed my board is stable with a quad at the fsb needed for those kinda clocks on a Q9450.

brand new on ebay for 800.00 + free shipping ............ i was lookign at these myself , but cannot justify that huge price for a cpu while mine still kicks ass.

http://cgi.ebay.com/CPU-intel-core-...yZ141323QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Yeah, but that's OEM. Ask around, with my track record, it was worth it for me to spend the extra $200 for the warranty. lol.

that is only if u use divx codec . The codec of the future is H.264 which offers better quality divx at the same bitrate . And it doesn't need sse4 cause its source code(of the x264 encoder) is so well optimized .

No, that's not true, if anything, H.264 needs the SSE4 optimization more. Not because it's inefficient, but because it's such an intensive codec. Divx/xvid encoding is much faster, due to it's less intensive nature.