- Joined
- Nov 16, 2020
- Messages
- 110 (0.06/day)
| System Name | Pre-10 year plan |
|---|---|
| Processor | FX 8350 |
| Motherboard | Asus M5A97 v2 |
| Cooling | Cooler Master Hyper 410 |
| Memory | 4 x Hyper X 4gb DDR3 1600 |
| Video Card(s) | Sapphire R9 390 8gb |
| Storage | 128gb SSD boot drive 512gb SSD |
| Display(s) | 1 x Benq 27" 4k 60Hz, 1 x AoC 27" 1080 165Hz |
| Case | Thermaltake Level 10 Combat edition |
| Audio Device(s) | On board |
| Power Supply | AX1200i |
| Mouse | Logitech G502 Hero |
| Keyboard | Logitech G512 |
| Software | Windows 10 |
So ive just dismantled four computers to re arrange the fleet a bit. This was formerly my gaming pc in my Thermaltake Level 10 case, but now been transfered into a NZXT case I picked up for free. PC consists of :
i5 10400 with stock cooler
ASrock B560 Steel Legend board
2 x Silicon Power 8gb sticks of DDR4 3200 ram
Fikwot 512gb M.2 PCIE 3x4 drive
Acer Predator A770 16gb graphics card
650w PSU (think its an Antec one)
Fan curves set so that both graphics and cpu fans will go silent up to around 50 degrees. When working on music he wants the pc as quiet as reasonably practical.
Cable management was really easy. PC is used for music processing (hes a musician and music producer) and for games. He wants to upgrade the cpu at some point to an i7 11700 add a few case fans (as currently there are none and air flow is thus limited). Its been a nice easy build and a clean finish. I will see if I can find a pic with graphics installed
i5 10400 with stock cooler
ASrock B560 Steel Legend board
2 x Silicon Power 8gb sticks of DDR4 3200 ram
Fikwot 512gb M.2 PCIE 3x4 drive
Acer Predator A770 16gb graphics card
650w PSU (think its an Antec one)
Fan curves set so that both graphics and cpu fans will go silent up to around 50 degrees. When working on music he wants the pc as quiet as reasonably practical.
Cable management was really easy. PC is used for music processing (hes a musician and music producer) and for games. He wants to upgrade the cpu at some point to an i7 11700 add a few case fans (as currently there are none and air flow is thus limited). Its been a nice easy build and a clean finish. I will see if I can find a pic with graphics installed
