• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

ac' 97

eljero

New Member
Joined
Feb 7, 2013
Messages
1 (0.00/day)
Hello everyone, I'm a newbie with a question.
I have a ASROCK A75 PRO4/MVP MOBO, and have installed the motherboard in a older acrylic tower and I am wanting to connect audio to the mobo.

The pins on the motherboard are: PLED+ PLED- PWRBTN GND DUMMY RESET GND HDLED- HDLED+:

And the tower connectors are:
LINEOUT FL-LINEOUT RL; LINEOUT FR-LINEOUT RR, MIC POWER (L), MIC IN (R) GROUND.
How do I connect these.
Thanking you for any info.
 
Joined
Apr 19, 2012
Messages
12,062 (2.75/day)
Location
Gypsyland, UK
System Name HP Omen 17
Processor i7 7700HQ
Memory 16GB 2400Mhz DDR4
Video Card(s) GTX 1060
Storage Samsung SM961 256GB + HGST 1TB
Display(s) 1080p IPS G-SYNC 75Hz
Audio Device(s) Bang & Olufsen
Power Supply 230W
Mouse Roccat Kone XTD+
Software Win 10 Pro
Fairly certain they go in the other internal connectors, usually along the bottom of the motherboard pcb, most will be labelled. look for the pin formations on the board, and how the hole are arranged on the tower leads.
 
Joined
Dec 6, 2005
Messages
10,881 (1.62/day)
Location
Manchester, NH
System Name Senile
Processor I7-4790K@4.8 GHz 24/7
Motherboard MSI Z97-G45 Gaming
Cooling Be Quiet Pure Rock Air
Memory 16GB 4x4 G.Skill CAS9 2133 Sniper
Video Card(s) GIGABYTE Vega 64
Storage Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue
Display(s) 34" LG 34CB88-P 21:9 Curved UltraWide QHD (3440*1440) *FREE_SYNC*
Case Rosewill
Audio Device(s) Onboard + HD HDMI
Power Supply Corsair HX750
Mouse Logitech G5
Keyboard Corsair Strafe RGB & G610 Orion Red
Software Win 10
Page 32 of your manual:

1. High Definition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
E. To activate the front mic.
For Windows® XP / XP 64-bit OS:
Select “Mixer”. Select “Recorder”. Then click “FrontMic”.
For Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS:
Go to the "FrontMic" Tab in the Realtek Control panel. Adjust
“Recording Volume”.
 
Joined
Apr 16, 2010
Messages
3,456 (0.67/day)
Location
Portugal
System Name LenovoⓇ ThinkPad™ T430
Processor IntelⓇ Core™ i5-3210M processor (2 cores, 2.50GHz, 3MB cache), Intel Turbo Boost™ 2.0 (3.10GHz), HT™
Motherboard Lenovo 2344 (Mobile Intel QM77 Express Chipset)
Cooling Single-pipe heatsink + Delta fan
Memory 2x 8GB KingstonⓇ HyperX™ Impact 2133MHz DDR3L SO-DIMM
Video Card(s) Intel HD Graphics™ 4000 (GPU clk: 1100MHz, vRAM clk: 1066MHz)
Storage SamsungⓇ 860 EVO mSATA (250GB) + 850 EVO (500GB) SATA
Display(s) 14.0" (355mm) HD (1366x768) color, anti-glare, LED backlight, 200 nits, 16:9 aspect ratio, 300:1 co
Case ThinkPad Roll Cage (one-piece magnesium frame)
Audio Device(s) HD Audio, RealtekⓇ ALC3202 codec, DolbyⓇ Advanced Audio™ v2 / stereo speakers, 1W x 2
Power Supply ThinkPad 65W AC Adapter + ThinkPad Battery 70++ (9-cell)
Mouse TrackPointⓇ pointing device + UltraNav™, wide touchpad below keyboard + ThinkLight™
Keyboard 6-row, 84-key, ThinkVantage button, spill-resistant, multimedia Fn keys, LED backlight (PT Layout)
Software MicrosoftⓇ WindowsⓇ 10 x86-64 (22H2)
Hello everyone, I'm a newbie with a question.
I have a ASROCK A75 PRO4/MVP MOBO, and have installed the motherboard in a older acrylic tower and I am wanting to connect audio to the mobo.

The pins on the motherboard are: PLED+ PLED- PWRBTN GND DUMMY RESET GND HDLED- HDLED+:

And the tower connectors are:
LINEOUT FL-LINEOUT RL; LINEOUT FR-LINEOUT RR, MIC POWER (L), MIC IN (R) GROUND.
How do I connect these.
Thanking you for any info.
You're having a text book case of RTFM.
What you're looking at, on your motherboard are the front-panel connections, where you will plug the power on and reset buttons, power LED and HDD access LED. The label PANEL1 should be close to it.
What you have on your hand, belonging to the tower, will go on a header that usually has a label like HD_AUDIO or FP_AUDIO.
 

de.das.dude

Pro Indian Modder
Joined
Jun 13, 2010
Messages
8,785 (1.73/day)
Location
Stuck in a PC. halp.
System Name Monke | Work Thinkpad| Old Monke
Processor Ryzen 5600X | Ryzen 5500U | FX8320
Motherboard ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4
Cooling 240mm Rad | Not needed | hyper 212 EVO
Memory 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600
Video Card(s) Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB
Storage Samsung 980 nvme (Primary) | some samsung SSD
Display(s) Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L
Case Ant Esports Tempered case | Thinkpad | Antec
Audio Device(s) Logitech Z333 | Jabra corpo stuff
Power Supply Corsair RM750e | not needed | Corsair GS 600
Mouse Logitech G400 | nipple
Keyboard Logitech G213 | stock kb is awesome | Logitech K230
VR HMD ;_;
Software Windows 10 Professional x3
Benchmark Scores There are no marks on my bench
i REALLY suggest you goto someone who knows computers. look at them work, and maybe next time you wont need help :)



this thread smells fishy.
 
Top