• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

AMD MSI RX 580 8Gb Armoc OC - error code 43

Status
Not open for further replies.
He he.
I still have my 2 cards somewhere in the stash.
I will try and give a reply what i managed .

Thanks a lot mate!
 
Mate, you're a treasure!
One of the cards is alive....
I mean i soldered (not me personally) a small resistor there 1.2k between 4 and 5.
After i cleaned old drivers with DDU and reinstall new drivers again....i patch them with atikmdag and...we have a winner
At least i put the card to test ...i am mining for 3 hours and so far so good.
Cheers mate
 
Hi guys, I was in the same boat, too. Thanks @2006_93Mike for the tip! I was wondering if anybody knows what capacitor highlighted in the attached image. Appreciate the help.
 

Attachments

  • InkedScreenshot_3.jpg
    InkedScreenshot_3.jpg
    2.1 MB · Views: 169
@ahmadaa - you were, that means you solved it ?
Unfortunately there is no info about that capacitor and i can't measure it like a resistor.
I have the same card but i don't know how to help you identify it.
 
impero said:
@ahmadaa - you were, that means you solved it ?
Unfortunately there is no info about that capacitor and i can't measure it like a resistor.
I have the same card but i don't know how to help you identify it.
Click to expand...
Yeah. It’s difficult to measure it unless it’s desoldered, which is very difficult. I looked online for any schematics and couldn’t find any.
For how I fixed mine, i got the logicand installed it. Didn’t use a capacitor.
 
Well, what logicand did you used ?
I mean how did you find it ?
On the other hand you do not use a capacitor there, instead it can be used a resistor of 1,2k.
 
Status
Not open for further replies.
Back
Top