Antec 900 Fan Controller Help Please

[snbase]

I was wondering what the best fan controller would be for the Antec 900 case that would fit into a 5.25" bay. I have the 4 stock Antec fans which are 4 pin molex and a Zalman 9500 Heatsink. The stock fans each have there own speed controller, but i want to set it up so i can control them all with a fan controller. Do i need to get adapters for all the fans?

This is what i was thinking...

Scythe Fan Controller
Scythe KM01-BK "KAZE MASTER" 5.25" Bay Fan Control...

4-Pin Molex to 3-Pin Fan Power Adapter Cable
http://www.svc.com/4to3ad.html

Also If i get the 3 pin adapters for the 4 pin molex fans will i be able to control the rpms on the fan controller??

 

[IINexusII]

no you cant get fan control from a molex since they only have red&black wires for power. youre gonna have to try getting the yellow wire out of the 3speed switch from the fan and do some mods

 

[snbase]

Is there any fan controllers with display that would work with my case without modding??

 

[snbase]

So i took apart the switch and as you can see it has its own black, red and yellow wires. So do i just need the yellow wire?