jrherras_iii
New Member
- Joined
- Jan 6, 2008
- Messages
- 85 (0.01/day)
- Location
- Belleville, New Jersey
System Name | Dunno :s |
---|---|
Processor | I7-920 @ 4.2ghz |
Motherboard | Gigabyte X58A UD7 |
Cooling | Corsair Hydro Series |
Memory | 1600mhz OCZ 6GB |
Video Card(s) | ATI Powercolor 5970 OC to 850/1200 |
Storage | 128gb Patriot SSD (Boot drive) WD 300gb Velociraptor |
Display(s) | 28" Hanns-G |
Case | Thermaltake Armor Plus |
Audio Device(s) | On board =s |
Power Supply | Antec 850 watts |
Software | Windows 7 ultimate 64-bit |
I just bought this mobo and the g-skill 1066 2gb flashed to mbios mobo detected 1066 at boot
I tried to OCed my g0 Q6600 to 3.4 but im having BSOD at prime so i went down to 3.3ghz
my vcore is 1.42 nb is 1.4 ram is 2.1v as advertised. should i try 1.45 for 3.4? btw im using Thermalright http://www.xoxide.com/thermalright-true-black-extreme-cpucooler.html with 2 fans can this heatsink handle 3.4? thanks in advance
I tried to OCed my g0 Q6600 to 3.4 but im having BSOD at prime so i went down to 3.3ghz
my vcore is 1.42 nb is 1.4 ram is 2.1v as advertised. should i try 1.45 for 3.4? btw im using Thermalright http://www.xoxide.com/thermalright-true-black-extreme-cpucooler.html with 2 fans can this heatsink handle 3.4? thanks in advance