REVHEAD
New Member
- Joined
- Aug 27, 2005
- Messages
- 300 (0.04/day)
- Location
- Sydney/ Australia
Processor | Intel i7 920 d0 stepping @ 200x19 qpi |
---|---|
Motherboard | Gigabyte EX58-UD3R |
Cooling | Noctua |
Memory | Patriot 1333 MHZ ram 6gb Triple Channel @ 1600 MHZ |
Video Card(s) | ATI 5870 x2 in Crossfire |
Storage | 4X WD 80gb Veloci Raptors in Raid 0 & Seagate 500gb 7200.11 x 2 in raid 0 |
Display(s) | Dell 3007 WFP |
Case | Lian Li A-10b |
Audio Device(s) | Asus Xonar STX |
Power Supply | CoolerMaster realpower pro 1000w |
Software | Windows 7 X64 ultimate RC |
Hello
I have a small problem ,its no biggy but had me dumb founded for a while.
I am running Windows 64 ,and ATI tool version 25 beta 7 ,when I run Spysweeper to do a fullsystem Scan it gets to the ATI Tool files and just freezes my whole system and I need to do a full reboot,It took me a while to work out what was doing it ,but found that shutting ATI tool down and then running a scan it would not freeze,then starting ATI tool again after scan.
I have ATI Tool to run on startup via Reg key,I never had problems with Spysweeper and ATI tool 23,or 24 builds,but obviosly I had problems with ATI fan speed settings and other numerous ATI tool problems within windows 64 with these earlier ATI builds ,so for me going back to an earlier version of ATI tool is not an option for me.
I just thought I would let you guys know about this problem ,and were wondering if others have had it, I would love it if you guys could fix this problem up ,but it not this may at least help some pple who have the problem ,and all they have to do is manually shut ATI tool down before doing a full Spysweeper Scan ,then to start ATI Tool again once scan is complete.
I have a small problem ,its no biggy but had me dumb founded for a while.
I am running Windows 64 ,and ATI tool version 25 beta 7 ,when I run Spysweeper to do a fullsystem Scan it gets to the ATI Tool files and just freezes my whole system and I need to do a full reboot,It took me a while to work out what was doing it ,but found that shutting ATI tool down and then running a scan it would not freeze,then starting ATI tool again after scan.
I have ATI Tool to run on startup via Reg key,I never had problems with Spysweeper and ATI tool 23,or 24 builds,but obviosly I had problems with ATI fan speed settings and other numerous ATI tool problems within windows 64 with these earlier ATI builds ,so for me going back to an earlier version of ATI tool is not an option for me.
I just thought I would let you guys know about this problem ,and were wondering if others have had it, I would love it if you guys could fix this problem up ,but it not this may at least help some pple who have the problem ,and all they have to do is manually shut ATI tool down before doing a full Spysweeper Scan ,then to start ATI Tool again once scan is complete.