- Joined
- Jul 28, 2014
- Messages
- 190 (0.05/day)
- Location
- Denmark
System Name | NorthBlackGoldDream |
---|---|
Processor | Ryzen 7600X |
Motherboard | Gigabyte B650M-DS3H |
Cooling | Arctic Freezer II 240 |
Memory | 16 GB DDR5-5200C40 |
Video Card(s) | GTX 1080 Ti 11 GB |
Storage | 1 TB NVMe PCIe 3.0 |
Display(s) | 24.5" 240 Hz TN |
Case | Fractal North Black Mesh |
Power Supply | 650W |
Alright so being a bit of a nutjob, I have started a small collection of CPUs.. But really, I also want to delve into GPUs. Seeing as they are BGA soldered to the PCB, I will have to hot-gun them off. The technique seems to be warming it up, will gently moving the chip. It should eventually let go ASAP.
My question is.. We will be hitting temps of 200 celcius. Even though no current is hitting the chip, Would the silicon be damaged? I mean to be fair, the chips are truthfuly put through a similar process when they are mounted to the PCB.. right?
Pre-emptive thanks to my fellow TPU'ers
My question is.. We will be hitting temps of 200 celcius. Even though no current is hitting the chip, Would the silicon be damaged? I mean to be fair, the chips are truthfuly put through a similar process when they are mounted to the PCB.. right?
Pre-emptive thanks to my fellow TPU'ers