BIOS for RX 580

[Chinas]

Hello,

I spent 2 days trying to figure out what is my RX 580 original BIOS and cant find one.
Could you help me finding out?

Also, is there some problem with my CMD?

Thank you!

 

[VuurVOS]

I spent 2 days trying to figure out what is my RX 580 original BIOS and cant find one.
Could you help me finding out?

Can you make a picture of the pcb and share it with us?

Also, is there some problem with my CMD?

No, the parameters changed with a newer version of amdvbflash. Please use version 2.93

 

[Chinas]

Is this what you asked for?

Sorry for quality,
Thanks for fast response

So... I've tried a BIOS but now i don't have image... Turned it into a bricked card... I've tried to login with CPU graphics and when i prompt "amdvbflash -i" (with the GPU on) it says :

C:\BIOS\Flash_tool>amdvbflash -i
AMDVBFLASH version 3.04+EXTERNAL, Copyright (c) 2019 Advanced Micro Devices, Inc.

Adapter not found

When should i connect/disconnect PIN 1 to 8?
I hope i didn't blow this GPU today

Any help aprettiated!
Thank you

 

[VuurVOS]

Is this what you asked for?

Sorry for quality,
Thanks for fast response

So... I've tried a BIOS but now i don't have image... Turned it into a bricked card... I've tried to login with CPU graphics and when i prompt "amdvbflash -i" (with the GPU on) it says :

C:\BIOS\Flash_tool>amdvbflash -i
AMDVBFLASH version 3.04+EXTERNAL, Copyright (c) 2019 Advanced Micro Devices, Inc.

Adapter not found

When should i connect/disconnect PIN 1 to 8?
I hope i didn't blow this GPU today

Any help aprettiated!
Thank you

Please provide a picture of the WHOLE pcb and dont use the card without the cooler.
I think you need to buy a ch341a programmer to perform a recovery.

 

[Chinas]

Fans are spinnng really fast but no GPU found on amdvbflash.
Thank you!

 

[VuurVOS]

Fans are spinnng really fast but no GPU found on amdvbflash.
Thank you!

Your card is a mining card (Panda R582 v13) from a Pandaminer rig. You need a D00033 bios.

Following bios you can try to flash after you bought a CH341A v1.7 programmer with SOC8 clip:

AMD RX 580 VBIOS

8 GB GDDR5, 1286 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Alternative bioses with string "D00033 580S A1" and Hynix H5GC8H24AJR support:

"D00033 580S A1" H5GC8H24AJR site:www.techpowerup.com/vgabios - Google Search

Alternative bioses with string "D00033 Polaris20 XL A1" and Hynix H5GC8H24AJR support:

"D00033 Polaris20 XL A1" H5GC8H24AJR site:www.techpowerup.com/vgabios - Google Search

 

[Chinas]

I will send the GPU to a store explaining what you sent to me and i will give you feedback as soon as possible.

You are a genious!
Curiosity: How do you know it's a Pandaminer rig?
Curiosity2: Do you think i will be able to have better performance with the new BIOS?
Curiosity 3: Did i flashed the wrong BIOS, right? Why i can't flash a new one now?

Thank you again

 

[VuurVOS]

Curiosity: How do you know it's a Pandaminer rig?

Panda R582 v13 is written on the card and there were some threads about it. So this card was likely taken from a Pandaminer rig.

Soyo RX 580

Goodmorning i bought this card and it does not have display even while booting i opened and i post to you some fotos please help... https://photos.app.goo.gl/FnPqJ5n2RxiQE1CQ6 https://photos.app.goo.gl/QGh8SGEi8jcAmzrp7 https://photos.app.goo.gl/1unXCeyG1Ru6h5AUA...

www.techpowerup.com

any bios fit for pandaminer b7 pro?

i got a pandaminer b7 pro with 2 of dp and 1 of hdmi gpu 215-0910052 memory Micron MT51J256M32HF please help me to find out any bios fit for it ,thanks.

www.techpowerup.com

Curiosity2: Do you think i will be able to have better performance with the new BIOS?

If you have a decent RX580 20418SP (D00033) bios with H5GC8H24AJR memory support it, it should work properly => https://www.techpowerup.com/vgabios/252155/252155

Curiosity 3: Did i flashed the wrong BIOS, right? Why i can't flash a new one now?

Its bricked due a wrong bios, Since it doesn't boot at all, you need to recovery it with a CH341A (v1.7) programmer.

 

[Chinas]

Hello,

Should i connect to 24 or 25 on CH341A?

 

[VuurVOS]

Hello,

Should i connect to 24 or 25 on CH341A?

That is an old version of the CH341A. That version is known of providing a too high voltage on the data lines (3.3v mode isn't fully 3.3v and can kill the card further)

V1.7 which has the fix for this problem looks like this:

We got a guide with flash instructions on techpowerup for the ch341a programmer:

Guide: Flashing with a hardware programmer

Lets get physical So; you tried flashing your GPU and you didn't backup. Now you have some dude on the forum linking you a BIOS but you have no way to apply it because you don't have a spare GPU either. Well no worries friend. In this guide we are going to cover the simple procedures of...

www.techpowerup.com

 

[Chinas]

Hello,

I was able tô erase my chip but i cannot write a new one, with the error in the print...

Ok, i was now able tô write on the chip and i tried the ROM you gave tô me but GPU still not showing on amdvbflash - i (Adapter not found)
I had a backup of the mining bios (the one that worked) but devem with that bios that was working, ia not now.

fans still rotating fast but no imagem or heat

 

[VuurVOS]

Hello,

I was able tô erase my chip but i cannot write a new one, with the error in the print...

Ok, i was now able tô write on the chip and i tried the ROM you gave tô me but GPU still not showing on amdvbflash - i (Adapter not found)
I had a backup of the mining bios (the one that worked) but devem with that bios that was working, ia not now.

fans still rotating fast but no imagem or heat

You didn't read my message. You are using a CH341A version which can kill the card....

Did you remove the card from the pc? Are you waiting until the programming is completed or are you surfing on the internet?
CH341A is very sensitive so the slighest latency can cause a bad flash. Close all programs before starting to use the programmer and dont use the computer until the flash is done (so no youtube, surfing on the internet etc).

 

[Chinas]

You didn't my message. You are using a CH341A version which can kill the card....

Did you remove the card from the pc? Are you waiting until the programming is completed or are you surfing on the internet?
CH341A is very sensitive so the slighest latency can cause a bad flash. Close all programs before starting to use the programmer and dont use the computer until the flash is done.

Yes i took the risk of voltage.. , i removed it and flashed it outside. I think i was able tô flash it sucessfully because when i verify the good BIOS, it is compatible with the same i open. And if o re open the software and read the chip, when i verify its the same as i open. I'm stuck now because its still not detectable. any tips?

Thank you again!!

 

[VuurVOS]

Can you share the bios you have flashed?

 

[Chinas]

I've tried the one that was before (WORKING)
And tried the one you gave me.
Is this print you asked for?

 

[VuurVOS]

Currently the bios I have provided isn't flashed on the card.
Can you make a picture how the cable is connected and a close up of the bios chip?

 

[Chinas]

Here!

 

[VuurVOS]

Here!

Placement of the cable looks to be correct.

Can you try to flash the following bios while every other application is closed during programming?

AMD RX 580 VBIOS

8 GB GDDR5, 1286 MHz GPU, 1750 MHz Memory

www.techpowerup.com

 

[Chinas]

Here!

 

[Dexiasz]

Hello friend, my post was deleted because it was written in Brazilian, the BIOS you must have is correct: https://www.techpowerup.com/vgabios/258275/258275

I used the version AMDV Flash 2.92 / Use it as an administrator and with Windows 8 compatibility mode

If you need to edit the BIOS version, get in touch, there is a way to install the BIOS using another code

 

[Chinas]

After some more hours trying tô flash and get the GPU detected on Windows, it wasnt sucessfully... Tried some diferente bios diferente manufactures... Any sugestion o how to proceed further?

 

[VuurVOS]

Hello friend, my post was deleted because it was written in Brazilian, the BIOS you must have is correct: https://www.techpowerup.com/vgabios/258275/258275

I used the version AMDV Flash 2.92 / Use it as an administrator and with Windows 8 compatibility mode

If you need to edit the BIOS version, get in touch, there is a way to install the BIOS using another code

Thats a mining bios since a real 2048SP would run 1284 or 1286MHz instead of 1180MHz.

After some more hours trying tô flash and get the GPU detected on Windows, it wasnt sucessfully... Tried some diferente bios diferente manufactures... Any sugestion o how to proceed further?

PUYA P25Q40H is soldered on the board and not EON EN25F80 which you have selected in the "CH341A programmer".

I have never tried Neo Programmer but it supports PUYA P25Q40H:

NeoProgrammer New Update V2.2.0.10

NeoProgrammer New Update V2.2.0.10 neo programmer 2.2.0.3 download neoprogrammer github neoprogrammer ic not responding neo programmer v2 2.0 8 ch341a programmer software asprogrammer download asprogrammer latest version neoprogrammer linux NeoProgrammer tools update V2.2.0.

www.dwdvb.com

 

[Chinas]

I think i was able to write it on the chip but still no GPU on Device manager / AMDVBFLASH

Im i doing something wrong?

 

[VuurVOS]

I think i was able to write it on the chip but still no GPU on Device manager / AMDVBFLASH

Im i doing something wrong?

The data pins of the black CH341A poprgrammer are 5 volt instead of 3.3 volt...so there is a big chance Polaris chip got fried since it got a higher voltage than designed.

The CRC32 checksum of the bios is D01BA70C. The programmer is showing a different CRC32 checksum first when reading the bios chip.

Can you do a bios dump with the programmer and share it here on the forums?

 

[Chinas]

bios dump? you say erase bios?