• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

BIOS for "Rx580 JieShuo" chip 215-0876406

SrKtwll

New Member
Joined
Jan 26, 2025
Messages
7 (0.04/day)
I want to be able to find a vbios for a graphics card that was given to me "JieShuo Rx580 8gb"
Being a Chinese brand I assumed that it could possibly be a scam graphics card and so it was, it doesn't give an image, even so I would like to be able to bring it to life.
Chip 215-0876406
Vram Samsung K4G80325FC

PS: The strange thing about this graphics card is that it only has one 6-pin voltage source input, I've attached photos for further help.
 

Attachments

  • 58a664eb-27ae-4541-a34a-2b4a1992358c.jpg
    58a664eb-27ae-4541-a34a-2b4a1992358c.jpg
    213 KB · Views: 162
  • 77c4f02b-0239-4abf-8f53-cb5fdf8b7906.jpg
    77c4f02b-0239-4abf-8f53-cb5fdf8b7906.jpg
    239.6 KB · Views: 170
  • 0732fddf-8c54-4f17-bac6-220ad33de5f8.jpg
    0732fddf-8c54-4f17-bac6-220ad33de5f8.jpg
    76.5 KB · Views: 155
  • 3904e366-47fc-41ce-bdc9-baf39fcca00e.jpg
    3904e366-47fc-41ce-bdc9-baf39fcca00e.jpg
    66.6 KB · Views: 136
  • 5469513d-bbd7-4ad0-bd2c-b355b3f453bc.jpg
    5469513d-bbd7-4ad0-bd2c-b355b3f453bc.jpg
    148.5 KB · Views: 140
  • ce430147-7d8e-4a5a-8065-8c695e1c39cc.jpg
    ce430147-7d8e-4a5a-8065-8c695e1c39cc.jpg
    173.3 KB · Views: 151
Last edited:
I want to be able to find a vbios for a graphics card that was given to me "JieShuo Rx580 8gb"
Being a Chinese brand I assumed that it could possibly be a scam graphics card and so it was, it doesn't give an image, even so I would like to be able to bring it to life.
Chip 215-0876406
Vram Samsung K4G80325FC

PS: The strange thing about this graphics card is that it only has one 6-pin voltage source input, I've attached photos for further help.
Can you flip the card over and get a picture of the back please
 
Sure! Here it is
Ok I see a code but no other pcb reference, so the card can be either a 1002 6FDF 1002 0B31 or a 1002 6FDF 1002 0000. Give me time to research.
 
Ok with your card having 1 pcie connector

Id be careful of the current draw on it

0B31 Bios



0000 bios





@VuurVOS maybe you can peek through them
 
Last edited:
Some additional bioses which you can try with low TDP limits.

 
Nothing guys... Unfortunately when I try it the PC just keeps restarting until it just stays on without starting anything.
I checked if there was any possible damage to the electronic part but everything is fine without any kind of short or strange voltage, even so if you find another bios that can help I would really appreciate it.
 
Not sure what else you can do in this matter, sometimes faults dont show on a multimeter, they can "appear good" but actually be bad.
 
Not sure what else you can do in this matter, sometimes faults dont show on a multimeter, they can "appear good" but actually be bad.
I compare, it can be something as minor as a bad communication of some component, even so if I find a solution later, I will be talking about it in this post.
 
I compare, it can be something as minor as a bad communication of some component, even so if I find a solution later, I will be talking about it in this post.
Youtube, some pros had gone as far as replacing the gpu core.
 
I compare, it can be something as minor as a bad communication of some component, even so if I find a solution later, I will be talking about it in this post.
Someone on this forum has the same PCB (A20A6D5-V1.0) with K4G80325FC memory on the card and found a working bios for it

This bios is used:

If it really doesnt work with this bios, then you have a hardware level defect.
 
Someone on this forum has the same PCB (A20A6D5-V1.0) with K4G80325FC memory on the card and found a working bios for it

This bios is used:

If it really doesnt work with this bios, then you have a hardware level defect.
And they all are 0b31s at that, i suspect the later too
 
Something interesting happened with the latest BIOS, it let me give an image, I was installing the driver to see if I could do normal tests and just as I started the installation the screen filled with pixel errors as if it had artifacts, for now I will check to see what it could be, if it is because of the BIOS or specifically because of some affected VRAM, I must clarify that when it gave me an image the screen was displayed perfectly without any strange signs of artifacts as it would normally be seen.
 
Those cards are typically used up like a french whore
 
Can someone pls help me with this one :
 

Attachments

  • GPU_CHIP.jpg
    GPU_CHIP.jpg
    202.3 KB · Views: 19
  • IMG_20250718_122456.jpg
    IMG_20250718_122456.jpg
    305.3 KB · Views: 17
  • GPU_RAM.jpg
    GPU_RAM.jpg
    283.5 KB · Views: 19
  • GPU_BACK.jpg
    GPU_BACK.jpg
    396.7 KB · Views: 19
  • IMG_20250718_122417.jpg
    IMG_20250718_122417.jpg
    424.6 KB · Views: 23
Can someone pls help me with this one :
See my response on your own thread:
 
Back
Top