• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

BIOS Passworded

OrbitzXT

New Member
Joined
Mar 22, 2007
Messages
1,969 (0.32/day)
Location
New York City
System Name AX-01
Processor Intel Core i5-2500K @3.7 GHz
Motherboard ASRock Z68 Extreme3 Gen3
Cooling Zalman 9700
Memory Kingston HyperX T1 Series 8GB DDR3 1600 MHZ
Video Card(s) GTX 590
Storage Intel X25-M
Display(s) 42" Samsung LED HDTV
Case Antec Twelve Hundred
Audio Device(s) HT | OMEGA STRIKER 7.1
Power Supply Kingwin 1000W
Software Windows 7 64-Bit
I used @BIOS to update from F7 Bios to the F8b because I was about to install an E8400 which I just did right now. It booted up fine but I forgot to set the motherboard to default before taking out the old CPU and put in the new one. I had the FSB at 444 and a few other things changed. It booted fine but I still went into Bios and loaded the Default settings. When I went back into the Bios the next time it says Enter Password in a red box. I've never set any kind of password in the bios before. Then I restarted and went in again and it had a typo and said Enper Password, which I thought was strange. Is something wrong here? Everything seems to be fine but I just can't get into my Bios. What can I do?
 
Joined
Sep 22, 2007
Messages
3,527 (0.58/day)
Location
UK
System Name Dream Weaver
Processor Ryzen 5600
Motherboard B450 MSI Gaming Pro Carbon AC
Cooling NH-D14
Memory 16GB Flare X @ 3200MHz CL14
Video Card(s) Sapphire Vega 64 Nitro+
Storage 500GB evo 970 m.2 + 4TB HDDs
Display(s) ASUS 27" 1440p 144hz FreeSync
Case Fractal Design Define R3
Power Supply Corsair 850W
Software Windows 10 x64
try "0000" as password?
 

OrbitzXT

New Member
Joined
Mar 22, 2007
Messages
1,969 (0.32/day)
Location
New York City
System Name AX-01
Processor Intel Core i5-2500K @3.7 GHz
Motherboard ASRock Z68 Extreme3 Gen3
Cooling Zalman 9700
Memory Kingston HyperX T1 Series 8GB DDR3 1600 MHZ
Video Card(s) GTX 590
Storage Intel X25-M
Display(s) 42" Samsung LED HDTV
Case Antec Twelve Hundred
Audio Device(s) HT | OMEGA STRIKER 7.1
Power Supply Kingwin 1000W
Software Windows 7 64-Bit
I did, I tried a few things I thought might be obvious. 0's, Gigabyte, the model number, the word password. Its so strange. It only started this after I loaded the default after flashing the bios to F8b.
 

Jimmy 2004

New Member
Joined
Jan 15, 2005
Messages
5,458 (0.78/day)
Location
England
System Name Jimmy 2004's PC
Processor S754 AMD Athlon64 3200+ @ 2640MHz
Motherboard ASUS K8N
Cooling AC Freezer 64 Pro + Zalman VF1000 + 5x120mm Antec TriCool Case Fans
Memory 1GB Kingston PC3200 (2x512MB)
Video Card(s) Saphire 256MB X800 GTO @ 450MHz/560MHz (Core/Memory)
Storage 500GB Western Digital SATA II + 80GB Maxtor DiamondMax SATA
Display(s) Digimate 17" TFT (1280x1024)
Case Antec P182
Audio Device(s) Audigy 4 + Creative Inspire T7900 7.1 Speakers
Power Supply Corsair HX520W
Software Windows XP Home
You tried a CMOS reset?
 

OrbitzXT

New Member
Joined
Mar 22, 2007
Messages
1,969 (0.32/day)
Location
New York City
System Name AX-01
Processor Intel Core i5-2500K @3.7 GHz
Motherboard ASRock Z68 Extreme3 Gen3
Cooling Zalman 9700
Memory Kingston HyperX T1 Series 8GB DDR3 1600 MHZ
Video Card(s) GTX 590
Storage Intel X25-M
Display(s) 42" Samsung LED HDTV
Case Antec Twelve Hundred
Audio Device(s) HT | OMEGA STRIKER 7.1
Power Supply Kingwin 1000W
Software Windows 7 64-Bit
Cmos reset worked, on a side note, I see something new that was either added with the new BIOS or has something to do with the new CPU. It says something along the lines of Fine CPU Ratio something or other? It can add 0.5 to the CPU ratio and it said (333x9.5) instead of the 9 like its supposed to be. I have it on in the BIOS but on boot and according to CPU-Z the multi is still 9. What is that about?
 

MadCow

New Member
Joined
Jun 8, 2007
Messages
544 (0.09/day)
Processor Athlon 64 X2 4400+ @2.6 GHz
Motherboard DFI LanParty UT CFX3200
Cooling 120mm Yate Loon fan intake, 82mm ex-PSU fan exhaust
Memory 2048 mb. of cheap DDR400 RAM w/cheap heatspreaders
Video Card(s) Sapphire+HIS X1950 PRO, Crossfired@635/709
Storage WD 250 GB SATA
Display(s) Samsung 216BW
Case No-name ATX case (modded to hell)
Audio Device(s) SB X-FI OEM
Power Supply Nikao Cool Power 500W (34a@12v)
Software Windows XP PRO SP2
Cmos reset worked, on a side note, I see something new that was either added with the new BIOS or has something to do with the new CPU. It says something along the lines of Fine CPU Ratio something or other? It can add 0.5 to the CPU ratio and it said (333x9.5) instead of the 9 like its supposed to be. I have it on in the BIOS but on boot and according to CPU-Z the multi is still 9. What is that about?

Well if your multi is locked at 9 it won't go any higher anyway. But half multis are kind pointless, I would say don't bother.
 
Top