- Joined
- May 21, 2008
- Messages
- 4,113 (0.71/day)
- Location
- Iowa, USA
System Name | THE CUBE 2.0 |
---|---|
Processor | Intel i5 13600k |
Motherboard | MSI MPG Z690 EDGE DDR4 |
Cooling | Phanteks PH-TC14PE BK 2x T30-120 Fan mod mount |
Memory | G.Skill TridentZ 3200 MT/s C15 32GB 2x16GB |
Video Card(s) | Gigabyte Aorus 1080 Ti 11GB OC: Core 2GHz, Mem 5.7GHz |
Storage | WD SN770 250GB / 3x WD SN850X 2TB / Toshiba X300 4TB / 2x RAID1 Toshiba P300 3TB |
Display(s) | Samsung 49" Odyssey OLED G95SC 240Hz 5120 x 1440 |
Case | "THE CUBE" Custom built, pure Red Alder wood |
Audio Device(s) | Beyerdynamic DT 880 |
Power Supply | Corsair RM1000X |
Mouse | Logitech G700 |
Keyboard | Logitech G910 |
Software | Windows 11 Pro |
Changed my case and cable management, temps went nice and low. I switched back to my old NZXT Tempest and man did it change my temps from the NZXT M59.
I'm making this thread for couple reasons
1- should i buy a Corsair H50 for the cpu so i can overclock higher than 3GHz, i currently have a Xiggy S1283
2- If i was to get the H50 what is another good fan to put on it for the push pull method, what type of temps would i see?
3- I just couldn't be-leave how much the temperature change was, i know some probably will say thats not much difference but i think it is.
Idle temps M59- CPU 31c, GPU1- 49c GPU2 47c Overall system 36c
Tempest- CPU 27c, GPU1 43C GPU2 43C Overall system 31c
temp in NFS 39c 60c 58c 36c
Crappy phone pic
I'm making this thread for couple reasons
1- should i buy a Corsair H50 for the cpu so i can overclock higher than 3GHz, i currently have a Xiggy S1283
2- If i was to get the H50 what is another good fan to put on it for the push pull method, what type of temps would i see?
3- I just couldn't be-leave how much the temperature change was, i know some probably will say thats not much difference but i think it is.
Idle temps M59- CPU 31c, GPU1- 49c GPU2 47c Overall system 36c
Tempest- CPU 27c, GPU1 43C GPU2 43C Overall system 31c
temp in NFS 39c 60c 58c 36c
Crappy phone pic