Computer Fails to POST

[MikeJeng]

hi there

 

[Nitro-Max]

you didnt damage any cpu pins did you?

 

[MikeJeng]

No.








Also,

I really do appreciate your help but it still doesn't work. lol

 

[Dr. Spankenstein]

Beeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeepppp

This is NOT the response on someone who want ANY more help from us.
You're making us think we're wasting our time here.

Take your time. Answer the questions. Provide feeback regarding what you've done.

 

[MikeJeng]

Ok.


It's a frustrating time for me. Especially because I've been planning this build for 4 months.

 

[erocker]

Please reply to my question by quoting it. Did you try running it with the mobo out of your case? If not, do it.

*Oh, and please delete your mindless Beeeep posts. Thank you.

 

[Nitro-Max]

Ok does the bios definatly support the cpu you have installed i know some do with a bios update maybe they shipped you one with a older bios that requires upgrade?

do you have another cpu to test in it.

 

[Nitro-Max]

Ok.


It's a frustrating time for me. Especially because I've been planning this build for 4 months.

we do understand that but were here to help questions might get repeated but not everyone wants to read the whole lot.

 

[MikeJeng]

Ok does the bios definatly support the cpu you have installed i know some do with a bios update maybe they shipped you one with a older bios that requires upgrade?

do you have another cpu to test in it.

It should. The box says "Support for Quad core 45nm processors"



Also, why can't i have my motherboard in the case. (erocker)

 

[Solaris17]

Ok.


It's a frustrating time for me. Especially because I've been planning this build for 4 months.

now try what i said b4 with a diff ram stick not of the same set diff brand w/e was in your other rig.

 

[ShadowFold]

What about trying it with out the cooler? I tried looking for a supported CPU list for it but I came up with nothing.

 

[erocker]

Something could be shorting it out from the backside. You've been at this all day now, might as well give it a try. The thing isn't going to start magically working all of a sudden.

What about trying it with out the cooler? I tried looking for a supported CPU list for it but I came up with nothing.

Again, bad, bad Idea.

 

[Solaris17]

It should. The box says "Support for Quad core 45nm processors"



Also, why can't i have my motherboard in the case. (erocker)

wait you didnt have iot out of the case?


you need to because when you bolt down a HS the board warps usually this doesnt happen however you have a heavy HS this will cause it to warp more we need to make sure the pins and solder points arent grounding...if you dont do this the board will short and brwak you need to do this as soo n as possible b4 you burn it if it isnt already.

 

[MikeJeng]

Ok.

I'll try in the morning. I don't have time now.

But Please , please PLease give me some more ways of fixing it.

 

[ShadowFold]

Something could be shorting it out from the backside. You've been at this all day now, might as well give it a try. The thing isn't going to start magically working all of a sudden.



Again, bad, bad Idea.

What about for just 5 seconds?

 

[erocker]

Ok.

I'll try in the morning. I don't have time now.

But Please , please PLease give me some more ways of fixing it.

There are no more ways, this thread has gone on way too long, and things are just being repeated over and over again. I suggest you read through this mess and start figuring it out. Tonight, I would start by disassembling it.

 

[Dr. Spankenstein]

Also, why can't i have my motherboard in the case. (erocker)

I KNEW IT! You little &$^#*^!!!


You kept saying over and over: "Yep. Did that. No luck."

You never did!

Pics or GTFO!

 

[erocker]

What about for just 5 seconds?

If we want to do things correctly, it's not a good idea as it will void the warranty. I would never suggest anyone ever run a modern processor without a cooler for any period of time.

 

[ShadowFold]

What kinda cpu is in your other rig use that cooler if can..

 

[Solaris17]

Ok.

I'll try in the morning. I don't have time now.

But Please , please PLease give me some more ways of fixing it.

you need to start quoting us directly so you answer our questions...but i thought of another idea.....someone said the diff sound levels of the beep is a cpu prob it may be seated corectly as you said the pins may be fine as you said but make sure the cpu arrow is in the right spot...if the cpu is turned the wrong way she aint booting.

 

[MikeJeng]

I'm a little evil liar.



I did it because I am assuming there is another way. But it seems there isn't.


BTW I don't own a camera.

 

[erocker]

Then I'm requesting this thread to be closed, as you are wasting all of our time.:shadedshu

 

[ShadowFold]

Then do it.. Im guessing its the cpu cooler or the board is getting shorted on the case.

 

[MikeJeng]

you need to start quoting us directly so you answer our questions...but i thought of another idea.....someone said the diff sound levels of the beep is a cpu prob it may be seated corectly as you said the pins may be fine as you said but make sure the cpu arrow is in the right spot...if the cpu is turned the wrong way she aint booting.

I believe it's correct. There are 2 tiny plastic pieces pointing towards the inside. I really do believe it is the right way.

 

[Dr. Spankenstein]

Good night.