Core 2 E6850 overclooking problems

asb2106 · Mar 10, 2008

Duekay said:
Oh wait i put full load on it and it has gone up to 18-20`c

your sensor is reading wrong, try going into your bios and seeing what is saying. Think of the logistics behind it, it can only be as cool as the air around you. And thats if the proc is not running. Add the heat that it produces and I am postive your proc is > 45C at load.

I run 2 big radz on a 1/2" system with fans everywhere and my q6600 @ 3.8 gets up to about 55C at full load

asb2106 · Mar 10, 2008

Duekay said:
PC Probe 2

thats odd, thats really odd.

Duekay · Mar 10, 2008

infrared said:
Don't make me say it a 5th time! lol

just down loaded it, 1 min

infrared · Mar 10, 2008

PC Probe reads the cpu temp from a sensor on the motherboard.

Please, use CoreTemp. It reads the temps strieght from the cores themselves.

Duekay said:
just down loaded it, 1 min

wooo

Duekay · Mar 10, 2008

God i don know what PC Probe is doing but it must be probing its self because Core Temp Says 33-34`c Must be something dodge going on

infrared · Mar 10, 2008

^read post above. Pc probe reads the temp from a sensor on the motherboard. Coretemp is reading the correct temperature

Now as long as the load temp is under 60-65c you're fine

Duekay · Mar 10, 2008

Seems a bit more realistic lol

infrared · Mar 10, 2008

Ok, back to the memory, have you tried at with the 4:5 divider yet?

Duekay · Mar 10, 2008

Yep i think that was my default 333MHz x2 With a 4:5 Ratio

infrared · Mar 10, 2008

I think it's a 5:6 divider, which doesn't work as well.

333 / 5 = 66.6
66.6 x 6 = 399.6

Hope that makes sence

There are loads of dividers to play with, but run some memory bechmarking softare, because not all work efficiently. I find either 1:1 or 4:5 are the ones to stick with if you can for the P35 motherboards, but it does vary from chipset to chipset.

1:1
5:6
4:5
3:4
2:3
1:2

asb2106 · Mar 10, 2008

I have gotten the best overclocking results with a 1:1 ratio. Anything else and the memory speeds get out of control.

Duekay · Mar 10, 2008

The only Ratios it seems to let me do are are 1:1 at 400MHz & 4:5 at 333MHz

Duekay · Mar 10, 2008

asb2106 said:
I have gotten the best overclocking results with a 1:1 ratio. Anything else and the memory speeds get out of control.

yea im getting my best at 1:1 too, it just wont let me get any higher than 840MHz My ram just gets into a fit

Duekay · Mar 11, 2008

A Small question: If i were to buy DDR2 1066MHz Ram (rather that my 800MHz Ram) with a 1:1 Ratio and Overclock the Bus Speed to 533MHz with the x9 multiplier = Near 4.8GHz

Would this work or am i just dreaming?

asb2106 · Mar 11, 2008

Duekay said:
A Small question: If i were to buy DDR2 1066MHz Ram (rather that my 800MHz Ram) with a 1:1 Ratio and Overclock the Bus Speed to 533MHz with the x9 multiplier = Near 4.8GHz

Would this work or am i just dreaming?

only if the proc can handle it. That would allow you to get closer, good ram can allow for a higher OC. But the proc will only go so high. And remember, anywhere past 4ghz and your temps are gonna be out of control!

infrared · Mar 11, 2008

In theory, but the cpu will max out long before 4.8ghz. You may be able to push to 4.2ghz before the temperatures and voltages involved start getting risky.

Honestly though, your g.skill has a lot of headroom there, you just need to up the dram voltage. Those sticks will do 1000mhz or more quite comfortably.

Duekay · Mar 11, 2008

Ok i was running 2.0-2.1V but it still just doesn't want to get past 840GHz, My motherboard natively supports up to DDR3 1333/DDR2 1066MHz I just don't get why its doing this to me :banghead:

asb2106 · Mar 11, 2008

Duekay said:
Ok i was running 2.0-2.1V but it still just doesn't want to get past 840GHz, My motherboard natively supports up to DDR3 1333/DDR2 1066MHz I just don't get why its doing this to me

i agree! I have G-Skill ddr2 1000 ram, I cant get it to 1000 for anything! I have a p5b deluxe, it only supports 800native - so im gonna credit it to that for right now

Duekay · Mar 11, 2008

asb2106 said:
i agree! I have G-Skill ddr2 1000 ram, I cant get it to 1000 for anything! I have a p5b deluxe, it only supports 800native - so im gonna credit it to that for right now

Yea mine says "the chipset officially supports the memory frequency up to DDR3 1066MHz/DDR2 800"But "Due to the tuning by ASUS exclusive technology, this motherboard natively supports up to DDR3 1333/DDR2 1066MHz", Doesn't seem to be using its exclusive technology to me lol

what FSB & Ratio are you running at?

asb2106 · Mar 11, 2008

Duekay said:
Yea mine says "the chipset officially supports the memory frequency up to DDR3 1066MHz/DDR2 800"But "Due to the tuning by ASUS exclusive technology, this motherboard natively supports up to DDR3 1333/DDR2 1066MHz", Doesn't seem to be using its exclusive technology to me lol

what FSB & Ratio are you running at?

415fsb - 1:1

Duekay · Mar 11, 2008

So you have a similar problem to me, so is your ram just not going past 830-840MHz i well. i wonder if its some setting in the bios or if its the ram or the mobo. or its a sign from above telling me not to go any faster

Duekay · Mar 11, 2008

Would it make any difference if i used Ram Slot 2 & 4 Rather than 1 & 3?

Tatty_Two · Mar 11, 2008

Duekay said:
Would it make any difference if i used Ram Slot 2 & 4 Rather than 1 & 3?

It can help yes.

Duekay · Mar 11, 2008

Tatty_One said:
It can help yes.

Cool thanks Ill give it a try tonight

System Name	File Server
Processor	2600k
Motherboard	idk
Cooling	H110
Memory	20gb of something
Video Card(s)	onboard!
Storage	2x120 SSD, (5x8tb)+(3x4tb) = 35 TB Z1 pool
Display(s)	couple 4k 32s
Case	cooler master something i think
Audio Device(s)	does anyone bother with anything but onboard?
Power Supply	Whatever OCZ PC Powercooling became. 1200 modular setup
Mouse	MX Master 2x
Keyboard	G710
Software	FreeNAS

System Name	File Server
Processor	2600k
Motherboard	idk
Cooling	H110
Memory	20gb of something
Video Card(s)	onboard!
Storage	2x120 SSD, (5x8tb)+(3x4tb) = 35 TB Z1 pool
Display(s)	couple 4k 32s
Case	cooler master something i think
Audio Device(s)	does anyone bother with anything but onboard?
Power Supply	Whatever OCZ PC Powercooling became. 1200 modular setup
Mouse	MX Master 2x
Keyboard	G710
Software	FreeNAS

System Name	Workstation : Server/HTPC
Processor	Core i7 920 @ 4.2GHz : Core i3 2120
Motherboard	Gigabyte GA-EX58-UD5 : Gigabyte GA-Z68MA-D2H-B3
Cooling	Cooler Master V8 : Stock
Memory	Corsair DDR3 12GB @ 1600Mhz : Corsair DDR3 8GB @ 1600Mhz
Video Card(s)	GTX 560 Ti & GT 430 : Onboard
Storage	OCZ Max I/O 2x128 SSD Raid0 + Corsair 3x120GB SSD Raid0 : Corsair 2x60GB SSD Raid0
Display(s)	Dual samsung 24" & 1 Acer 22" : Acer 22 & Samsung 46" TV
Case	Antec P182 Performance One : Antec 4U rackmount
Audio Device(s)	Mackie Onyx 400F 10x10 : Maudio Fast Track Pro
Power Supply	Corsair HX-620 : Corsair HX-650
Software	Windows 7 64bit, Cubase 5 : Windows 7 64bit

System Name	Box of Distraction
Processor	Ryzen 7 1800X
Motherboard	Crosshair VI Hero
Cooling	Custom watercooling
Memory	G.Skill TridentZ 2x8GB @ 3466MHz CL14 1T
Video Card(s)	EVGA 1080Ti FE. WC'd & TDP limit increased to 360W.
Storage	Samsung 960 Evo 500GB & WD Black 2TB storage drive.
Display(s)	Asus ROG Swift PG278QR 27" 1440P 165hz Gsync
Case	Phanteks Enthoo Pro M
Audio Device(s)	Phillips Fidelio X2 headphones / basic Bose speakers
Power Supply	EVGA Supernova 750W G3
Mouse	Logitech G602
Keyboard	Cherry MX Board 6.0 (mx red switches)
Software	Win 10 & Linux Mint
Benchmark Scores	https://hwbot.org/user/infrared

System Name	Workstation : Server/HTPC
Processor	Core i7 920 @ 4.2GHz : Core i3 2120
Motherboard	Gigabyte GA-EX58-UD5 : Gigabyte GA-Z68MA-D2H-B3
Cooling	Cooler Master V8 : Stock
Memory	Corsair DDR3 12GB @ 1600Mhz : Corsair DDR3 8GB @ 1600Mhz
Video Card(s)	GTX 560 Ti & GT 430 : Onboard
Storage	OCZ Max I/O 2x128 SSD Raid0 + Corsair 3x120GB SSD Raid0 : Corsair 2x60GB SSD Raid0
Display(s)	Dual samsung 24" & 1 Acer 22" : Acer 22 & Samsung 46" TV
Case	Antec P182 Performance One : Antec 4U rackmount
Audio Device(s)	Mackie Onyx 400F 10x10 : Maudio Fast Track Pro
Power Supply	Corsair HX-620 : Corsair HX-650
Software	Windows 7 64bit, Cubase 5 : Windows 7 64bit

Core 2 E6850 overclooking problems

asb2106

asb2106

Duekay

New Member

infrared

Duekay

New Member

infrared

Duekay

New Member

infrared

Duekay

New Member

infrared

asb2106

Duekay

New Member

Duekay

New Member

Duekay

New Member

asb2106

infrared

Duekay

New Member

asb2106

Duekay

New Member

asb2106

Duekay

New Member

Duekay

New Member

Tatty_Two

Gone Fishing

Duekay

New Member

Processor	Intel Core i9 11900KF @ -075mV PL max @225w
Motherboard	MSI MAG Z490 TOMAHAWK
Cooling	DeepCool LS520SE Liquid + 3 Phanteks 140mm case fans
Memory	32GB (4 x 8GB SR) Patriot Viper DDR4 @ 3600Mhz CL14 1.45v Gear 1
Video Card(s)	Asus Dual RTX 4070 OC
Storage	WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s)	AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case	Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s)	Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply	Seasonic CORE GM650w Gold Semi modular
Mouse	Coolermaster Storm Octane wired
Keyboard	Element Gaming Carbon Mk2 Tournament Mech
Software	Win 10 Home x64