Corsair XMS3200c2pro V4.3 All Info I Can Get

[Kalero]

Ok i have 2x 512 Corsair XMS3200C2PRO v4.3 and i want to get all the info about them.
I have a X2 3800+ CPU on ABIT AN8 ULTRA and want to OC as much as posibile with those memories.
I need maximum FSB they can reach, at what timings, voltage etc

THIS IS WRITEN ON THEM:
XMS3202 V4.3
0518032-3

thank you in advance

 

[Spinal C]

ah the power of cpu-z

 

[Kalero]

? i don't get it?
i'm not cpu-z maniac just want to OC to max i cand reach with the hardware i got

 

[Spinal C]

all ram sticks are different boss, you cant expect it to do 270fsb @ 2-2-2-5, i say you'll max out 230 before you have to loosen the timings if they're at 2-2-2-5 on stock.

 

[djbbenn]

They are probably TCCD chips on them. So they do a nice overclock. The V4.2 was TCCD/TCC5, so I would assume that they would still be using that.

-Dan

 

[Kalero]

it's not about timings man... i just want a big FSB... ~260-270 that's all.
at what timings should i config them?

 

[djbbenn]

If its TCCD/TCC5 probably 2.5-4-4-8 at 2.9V. Thats to get 270+, it could be looser timings and maybe a little more voltage though (3.0V). They don't like voltage like BH-5.

-Dan

 

[Spinal C]

If its TCCD/TCC5 probably 2.5-4-4-8 at 2.9V. Thats to get 270+, it could be looser timings and maybe a little more voltage though (3.0V). They don't like voltage like BH-5.

-Dan

my TCCD chips do 2.5-3-3-7 @ 2.9v and 260fsb.

 

[djbbenn]

Ya they will take most things you give them. But they do have limits.

-Dan

 

[bobyjo]

Really good TCCD chips on BrainPower PCB's will go to about 230mhz, at 2,2,2,5,1T.
If you want to go up to like 270 or so.
You are gonna have to set the memory to 3,4,4,8,1T.
You may even have to go much looser, like 3,6,6,10,1T
If your memory will not run at 1T.
You will have no choice but to set the Command Rate to 2T.