custom watercooling help

[Johnt31]

Good morning all,

I would like to start a custom watercooling.

my config:

MB: asus rog strix Z 370 STRIX-F GAMING
CPU: I5 8600 K oc 5.0 GHZ@ 1.36v + delid
COOLING: Bequiet dark rock pro 4
RAM: Gskill Tridend Z RGB 3000mhz@3200Mhz
GPU: MSI RTX 2070 gaming z
ALIM: corsair RM750 yellow label
HHD: 1 Seagate Barracuda 2 to
SSD: 1x Samsung 860 QVO 1To, 1x Crucial MX 500 512 Go, 1X Sabrent rocket 1To ,1x XPG S11 Gaming 512 Go
Case: coolerMaster H500p

I started to learn about custom watercooling after I would like to have a water block cpu + gpu + tank pump.

Cpu bloc: BYKSKI CPU-XPR-MK-V3 : https://fr.aliexpress.com/item/40004...c00psOJuy&mp=1
Gpu: block:BYKSKI MSI RTX2070 GAMING Z 8G: https://fr.aliexpress.com/item/32967...c00psOJuy&mp=1
Radiateur: Hardware Labs Nemesis 360GTS x2 : they are out of stock for the moment
Reservoir/pump: I thinking of going on a reservoir Heatkiller 200m on d5 https://www.aquatuning.fr/refroidiss...r-tuyau-200-d5
on the other hand i dont know wich pump to associate with it
or i think to buy this ekwb https://www.ekwb.com/shop/ek-quantum...m-d-rgb-plexi][/color]

fan: I was thinking of going on corsair ML 120 rgb or on noctua 120mm Noctua NF-F12 PWM fan or bequiet silent wing 3 with HALOS LUX RGB GRAY, 120 mm phantheck for rgb

1) what are the barrow or bykski performances in waterblock Cpu /Gpu compared to ekwb / bitspower ?
2) i search argb fan compatible with watercooling


thank you in advance for your feedback

 

[P4-630]

or on noctua

Noctua NF-A12x25 PWM Fan Review

Noctua's long awaited NF-A12x25 fan hits the market with a bang in more ways than one. With more features than I can count with my fingers, all of which have been used to optimize performance and acoustics, it is a fan that makes no excuses about the lack of RGB lighting as it puts up a great...

www.techpowerup.com

 

[xtreemchaos]

barrow or bykski are good i use a barrow cpu block and it works really well and ive fitted a few bykski gpu block and distros for customers and havnt heard any complaints and there a good bit cheaper than EK kit.

 

[Johnt31]

barrow or bykski are good i use a barrow cpu block and it works really well and ive fitted a few bykski gpu block and distros for customers and havnt heard any complaints and there a good bit cheaper than EK kit.

thank you for your feedback,
Have you already installed byskski or barrow pumps d5 model ? if have you had feedback onperformance and noise on this part ?

 

[xtreemchaos]

i carnt remember fitting a barrow D5 but ive fitted a few EKD5s and D3s there really quite once the air is out the loop.

 

[Johnt31]

thank for reply