DDR4 Kingston HyperX Fury 2400Mhz 2x8GB?

[vonKoga]

Hi!
I currently have this memory , but i'm thinking of shifting to a memory with better performance. What would you recommend?

I have a good offer for this memory:

https://www.kingston.com/dataSheets/HX434C19FB2K2_16.pdf

 

[TheLostSwede]

Not very good latency, regardless of the CPU you're going to use that with. You want to get something that's 18 or below ideally, even at those speeds.
Admittedly that's supposed to be at 1.2V, so if they can go tighter with 1.3-1.35V, it might not be all bad.
Obviously it depends on what you can get locally.

Only review I can find, open in incognito mode, as they have an AdBlock checker.

HyperX FURY DDR4-3466 16GB Dual-Channel Memory Kit Review

There is much to like about the HyperX Fury DDR4-3466 16GB Dual-Channel Memory Kit, its simple yet effective design complements its performance.

www.tweaktown.com

 

[vonKoga]

Can you please specify which memory, I'm a total noob.

 

[TheLostSwede]

Can you please specify which memory, I'm a total noob.

I honestly couldn't say, but if you're getting that Kingston memory, you need to tweak it manually as per the review, to get the best performance out of it.
You shouldn't have any problems doing that with your other hardware.

 

[vonKoga]

It's not an imperative to buy this memory, if it's shady i'm opened to recommendations

Is it safe to use let's say this memory;

Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory

pcpartpicker.com

in combination with 8GB of the Kingstony HyperX Fury 2400Mhz ?

 

[GorbazTheDragon]

A lot of the 3200c16 LPX kits are AFR and MFR, runs fine at XMP on just about anything but pretty close to 0 OC headroom. They are usually one of the cheapest 3200c16 options so I would recommend those if you just want to run XMP. Higher frequency XMP kits aren't really going to give good bang for the buck on intel.

I wouldn't bother trying to run different kits, in theory you can run one kit in one channel and the other kit in the other channel, frequency has to be the same on both but you can change timings between the two. That's still a PITA though so I wouldn't recommend it.

If you want to have a cheap set of DDR4 to tweak I would look for 3000c15 or 3200c16 crucial ballistix sport sticks with AES in the part number. Most of those kits are rev. E ICs which are pretty fast and easy to work with.

 

[TheLostSwede]

It's not an imperative to buy this memory, if it's shady i'm opened to recommendations

Is it safe to use let's say this memory;

Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory

pcpartpicker.com

in combination with 8GB of the Kingstony HyperX Fury 2400Mhz ?

You don't want to mix two different speed grades, as all the RAM will run at the slower speed.