- Joined
- May 18, 2009
- Messages
- 2,761 (0.51/day)
- Location
- MN
System Name | Personal / HTPC |
---|---|
Processor | Ryzen 5900x / i5-4460 |
Motherboard | Asrock x570 Phantom Gaming 4 /ASRock Z87 Extreme4 |
Cooling | Corsair H100i / stock HSF |
Memory | 32GB DDR4 3200 / 8GB DDR3 1600 |
Video Card(s) | EVGA XC3 Ultra RTX 3080Ti / EVGA RTX 3060 XC |
Storage | 500GB Pro 970, 250 GB SSD, 1TB & 500GB Western Digital / 2x 4TB & 1x 8TB WD Red, 2TB SSD & 4TB SSD |
Display(s) | Dell - S3220DGF 32" LED Curved QHD FreeSync Monitor / 50" LCD TV |
Case | CoolerMaster HAF XB Evo / CM HAF XB Evo |
Audio Device(s) | Logitech G35 headset |
Power Supply | 850W SeaSonic X Series / 750W SeaSonic X Series |
Mouse | Logitech G502 |
Keyboard | Black Microsoft Natural Elite Keyboard |
Software | Windows 10 Pro 64 / Windows 10 Pro 64 |
do you get no power from the board at all ?
check and make sure the clr cmos jumper isn't shorted some-boards wont do anything with the clr cmos jumper enabled if your board has a reset button for that check that as well as well as any and all other jumpers
make sure the power switch polarity is correct,try bridging the pins with a shiny screw driver (yea I know switch polarity lolwat but I have seen some boards no cooperate)
Only jumper is the clear cmos. I removed it, still no power through the new mb with any psu. The Ethernet cable shows no power light and the onboard led code doesn't light up. I checked the clear cmos button and pushed it, I also pulled the battery for a minute, still no luck.