- Joined
- Jan 13, 2006
- Messages
- 1,497 (0.22/day)
- Location
- Windsor, Ontario, Canada
System Name | Bones Beast |
---|---|
Processor | Intel Core i7 4770k@4.5ghz |
Motherboard | ASROCK Extreme 3 Z87 |
Cooling | Corsair H100 4x120mm fans! |
Memory | 2x4gigs Corsair Vengance 2400mhz |
Video Card(s) | XFX R9 290 @1151/1350/Corsair H55 |
Storage | Samsung 120gig 840/OCZ Vector 120gig SSD/500gig SG/320 |
Display(s) | Samsung S27A950D 27in 3D 120hz monitor |
Case | NZXT S340 |
Audio Device(s) | Asus Zonar d1/Z506 Speakers |
Power Supply | Coolermaster GX750watt PSU |
Software | Windows 10 64bit |
now i have ati tool and i use it to increase my clock speeds but do i really need it to test if its stable...can i just use gaming to test for stability...or run a continuous loop of 3dmark05 for the night while i sleep?...i just played over 2hrs of bf2 with an oc of 525/550 from 400/490 and it ran fine at ilde temps of 20C and load of 35c...but with ati tool if i run the scan it last for only about 30mins then my screen goes blank and it says that there is no signal and then i have to reboot..so theres my question thanks for any replies
Boneface
Boneface