- Joined
- Feb 11, 2009
- Messages
- 2,595 (0.62/day)
| System Name | Cyberline |
|---|---|
| Processor | Intel Core i7 2600k |
| Motherboard | Asus P8P67 LE Rev 3.0 |
| Cooling | Tuniq Tower 120 |
| Memory | Corsair (4x2) 8gb 1600mhz |
| Video Card(s) | AMD RX480 |
| Storage | Samsung 750 Evo 250gb SSD + WD 1tb x 2 + WD 2tb |
| Display(s) | Philips 32inch LPF5605H (television) |
| Case | antec 600 |
| Audio Device(s) | Focusrite 2i4 (USB) |
| Power Supply | Seasonic 620watt 80+ Platinum |
| Mouse | Elecom EX-G |
| Keyboard | Rapoo V700 |
| Software | Windows 10 Pro 64bit |
So a little while ago there was a Windows 10 update.
This messed things up for me...
I have 2 issues now that maybe someone here has some ideas about.
1. I have to start up my pc twice for it to actually start up.
I start up the pc and it hangs on a blackscreen with a Dos like blipping dash in the top left corner, it does not move on from there.
Then I turn it off by hitting the power button, and hit the button again and it will normally boot into windows.
2. Once I am in windows my sound is messed up, its this distorded sound that also makes videos move really slowly.
The only way to fix this is to turn the sound to a lower settings, normally its 16bit 96k, I turn it down to 16bit 41k, hit the test button, then turn it back to 96k and it will work fine again.
But I have to do this every time I start up the pc.
My soundcard is an Focusrite 2i4 btw which is USB and I did try a different USB port.
This messed things up for me...
I have 2 issues now that maybe someone here has some ideas about.
1. I have to start up my pc twice for it to actually start up.
I start up the pc and it hangs on a blackscreen with a Dos like blipping dash in the top left corner, it does not move on from there.
Then I turn it off by hitting the power button, and hit the button again and it will normally boot into windows.
2. Once I am in windows my sound is messed up, its this distorded sound that also makes videos move really slowly.
The only way to fix this is to turn the sound to a lower settings, normally its 16bit 96k, I turn it down to 16bit 41k, hit the test button, then turn it back to 96k and it will work fine again.
But I have to do this every time I start up the pc.
My soundcard is an Focusrite 2i4 btw which is USB and I did try a different USB port.
