• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

DTS DCH Driver for Realtek HDA [DTS:X APO4 + DTS Interactive]

After testing alan's driver am confused cause official HP driver feels more balanced. I dont know now if i should switch to alan's driver.
 
Interesting, it must be optimized for your chip and situation, such as the ports (or lack of), and OEM locks (lack of normal features).

In a previous post you mentioned the extension only version working with your HP driver?

----


Based on feedback provided by @ador250, optional.
 
Last edited:
After testing alan's driver am confused cause official HP driver feels more balanced. I dont know now if i should switch to alan's driver.
I think use official hp driver with apo driver by alanfox2000 (but still dts:x ultra can't work)
 
Delete all the lines and make one line that matches Realtek and then no further:

HDAUDIO\FUNC_01&VEN_10EC

Example:

[AzaliaManufacturerID.NTamd64.10.0...15063]
%Device.Description% = IntcAzAudModelSST,INTELAUDIO\FUNC_01&VEN_10EC
%Device.Description% = IntcAzAudModel,HDAUDIO\FUNC_01&VEN_10EC

This will make it install on any Realtek device (VEN_10EC).

----

Good luck.
 
@Ferather my hardware id is (HDAUDIO\FUNC_01&VEN_10EC&DEV_0285&SUBSYS_103C86D5) but most nearest config file should be HP103C8603or HP103C8600
 
Hmmm, not sure if you will find it that way, you really just need a HP driver for 285 that has DTS:X in it, you probably wont find one with your subsys.
 
How do i convert this to for my pc

[ApoComponents.NTamd64]
%Apo.ComponentDesc% = ApoComponent_Install,SWC\VEN_DTSI&AID_DTSI2


[DTSService.NTamd64]
%Service.ComponentDesc% = DTSService_Installx64,SWC\VEN_DTSI&HID_DTSIAPO4xSERVICE
 
@Bryan Ü, you can leave those, those are to attach to the main driver, which somewhere in its .inf has the codes for VEN_DTSI&AID_DTSI2, so the software component can attach to it.
@leveltrauma, you are very welcome. I have built the driver to be full of DTS features, but with maximised performance (latency), low system cost.

@Everyone, feel free to modify or change the preset's, the main folder is here. I encourage feedback, thank you.
If you find a preset from another driver I have not got, and it's a good quality, let me know.
 
DTS DCH 6.0.9147.1 (New)(Signed) -- Read post 1 (here) for the downloads, apps and install guide, uninstall all DTS apps before the driver.
If you installed your own preset or used one of the updates, delete the files in Windows/System32/DTS/PC/APO4x/.

----

@Bryan Ü, I'll help you with that too, but you will need the APOTool and Class ID's files from my driver, DM me.
 
I'm really enjoying the new preset from @ador250 + my multichannel edits, enough bass to turn it down with a LFE (5.1), sounds amazing with the new drivers.
Here is a source for analogue 7.1 (PCM), if you play it over SPDIF, you will notice side channels is played as virtual sides (front-rear combo).

1619269692400.png1619270050993.png
 
ALC887 rev. 1003, hmm try ALT1 driver rather than main.
tried with latest version for ALC 887, but same problem, I hearing music output through microphone.
Somehow problem is with this realtek setting with your driver, looks like ignoring this setting:
1619271384337.png


Now installed Alan's driver without SPDIF DDL/DTS decoding (because cant make it work) where is no problem with microphone with AEC on.
 
Last edited:
Back
Top