• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

DTS Sound Unbound

I enabled AEQ earlier, and set gain at 4, so far it seems better for multichannel (APO4-Off preset), still testing it.

Updated presets:
The Ferather one will be in the next update.

----

Results:

AEQ - Very good, but can cause decay with low quality audio.
SFX, MFX as 'ANY' instead of 'Stereo', same as above.

Best results:

MBHL Enable - 1
MBHL Anticlip Enable - 1
MBHL Anticlip Level - 4
MBHL Distortion Preventable - 8
 
Will it work on my Asus tuf Mobo which comes with DTS custom (lite version)?
 
It will override your Custom. Try this version, it will bolt onto your custom. However for a custom, you will need to take note of the FX keys being used, and their position.
Once you do the .reg files, you will then need to re-enter these keys in order to make your custom work as intended, as well as DTS:X.

You might need to tinker slightly, as 'some' FX's need to be first at some point for detection.

This version will work also with Windows drivers, as well as AMD and so on.

----

{A515262A-68B3-441A-A310-0D145362EE87} (Interactive), must always be last on EFX (final out).
 
Last edited:
It will override your Custom. Try this version, it will bolt onto your custom. However for a custom, you will need to take note of the FX keys being used, and their position.
Once you do the .reg files, you will then need to re-enter these keys in order to make your custom work as intended, as well as DTS:X.

You might need to tinker slightly, as 'some' FX's need to be first at some point for detection.

This version will work also with Windows drivers, as well as AMD and so on.

----

{A515262A-68B3-441A-A310-0D145362EE87} (Interactive), must always be last on EFX (final out).
How to modify acer xml to asus xml
acer xml cannot be used
 
That should not be the case, it's likely you have an issue elsewhere, still you can try changing it, please note, most OEM presets are not fully optimized:


Place the preset into the 'WIN10\APO4' folder, then run the install.
 
Back
Top