• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Dynatron Intros A49, a Dual Fin-Stack, 4U-compatible Socket AM5 CPU Cooler

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,677 (7.43/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Dynatron focuses on server/workstation cooling solutions, and developed the A49, a Socket AM5 cooler with a dual aluminium fin-stack heatsink that's designed to work with 4U rackmount cases, although it will fit inside ATX tower cases just fine, with its 130 mm height. Two dense aluminium-alloy fin-stacks are skewered by six 6 mm-thick copper heat pipes that make direct contact with the processor over a high-performance thermal pad. The heatsink is ventilated by a custom 103 mm x 103 mm x 30 mm fan that turns at speeds of up to 1800 RPM, pushing up to 35.03 CFM of airflow at 28.8 dBA noise output, and 1.16 mm H₂O static pressure. Dynatron says the cooler can handle thermal loads of up to 170 W. The cooler measures 95 mm x 95 mm x 130 mm, weighing 710 g.



View at TechPowerUp Main Site
 
Nice industrial cooler. I would put 3 - 92mm fans on that badboy.
 
like it, no nonsense, straight business
 
Aluminum base...
 
That’s what I thought, too, but, at least according to dynatron, it does have an aluminum base

 
That’s what I thought, too, but, at least according to dynatron, it does have an aluminum base

Yeah I was excited and went and looked at the spec sheet. Like why they gonna cheap on that?
 
Look at my Noctua NH-D15S. Same design which gives superior air cooling. Can improve by adding a secondary fan like the OG D15.
 
The pipes sit in an aluminum base but that pic looks like paste cause you can see clean aluminum on the sides and the center is dirty paste.

Here is a pic of the A39 on amazon, so there you are.
61oNEzSD7LL._SL1000_.jpg
 
Last edited:
Back
Top