BETA911
New Member
- Joined
- Aug 31, 2010
- Messages
- 9 (0.00/day)
System Name | B911 |
---|---|
Processor | i7 920 @ 4.2Ghz |
Motherboard | Asus Rampage II Gene |
Cooling | Custom WC cooling |
Memory | OCZ Gold Low-voltage 1600Mhz CL8 (3 x 2GB) |
Video Card(s) | MSI 8800GTS G92 Overclock, Sapphire HD4870X2 |
Storage | 2 x Seagate 7200.11 500GB 32MB (@Raid0) |
Display(s) | Philips 32" FullHD 5-series |
Case | Coolermaster CM690 Advanced II |
Audio Device(s) | Onboard |
Power Supply | OCZ ModXtream 700W |
Hello guys,
After almost 2 years just reading down here I finally registered myself.
The problem is as follow.
I bought a second hand HD4870X2. The guy was so kind to bring it because we where dealing with a HD4870X2 + EK Acetal block so shipping this with that weight is not so jammy.
On arrival I asked him if I can check the card if it is working. I plugged it in and I got a image on my screen. So far so good.
Because I was building a whole rig around this card it has been laying now for almost 2 weeks. After building all this day I noticed in windows that it only recognised 1 card and the other was named "HD4800 series"...
After some closer inspection it looks like the slave core on this card has been flashed to a HD4870 (device id matches also). I thought, just download a HD4870X2 master and slave bios on your GPU database and flash it. But here came the trick. The master flashed itself without any problems, but the slave refuses to flash in any way...
What's up????
Screens:
So my big question is, can ANYBODY help me?
For the record, the first (master) core works without any problem. I can even game and so on... --->>> I tested Bad Company 2 and within the startup I got artifacts and few seconds later my whole PC hangs itself up...
Same problem here: How To Use ATIFLASH
After almost 2 years just reading down here I finally registered myself.
The problem is as follow.
I bought a second hand HD4870X2. The guy was so kind to bring it because we where dealing with a HD4870X2 + EK Acetal block so shipping this with that weight is not so jammy.
On arrival I asked him if I can check the card if it is working. I plugged it in and I got a image on my screen. So far so good.
Because I was building a whole rig around this card it has been laying now for almost 2 weeks. After building all this day I noticed in windows that it only recognised 1 card and the other was named "HD4800 series"...
After some closer inspection it looks like the slave core on this card has been flashed to a HD4870 (device id matches also). I thought, just download a HD4870X2 master and slave bios on your GPU database and flash it. But here came the trick. The master flashed itself without any problems, but the slave refuses to flash in any way...
What's up????
Screens:
So my big question is, can ANYBODY help me?
For the record, the first (master) core works without any problem. I can even game and so on... --->>> I tested Bad Company 2 and within the startup I got artifacts and few seconds later my whole PC hangs itself up...
Same problem here: How To Use ATIFLASH
Last edited by a moderator: