• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Fata Drives

dorsetknob

"YOUR RMA REQUEST IS CON-REFUSED"
Joined
Mar 17, 2005
Messages
9,106 (1.24/day)
Location
Dorset where else eh? >>> Thats ENGLAND<<<
My brother has just visited me amongst the conversation we had he mentioned he had six
HP hard drive s- 500 GB -all FATA interface
Now what he and i would like to know is what is needed and how to connect them for the desk top
they are Bare drives no interface
any idea's anyone
 
I have never heard of FATA. To Google!
 
Well you could get an fiber channel host bus adapter, but they might not be as easy to find these days
 
Then your the wrong people to try and answer my question
thank you


@GreiverBlade
Thanks for those links including the "" Google one"" unfortunatly its not alot of help
Or they could do the same research you should be doing.
 
I have no idea so I am not going to say anything.
 
Or they could do the same research you should be doing.
or the one that i did ... since the description of what it was, was found within less than 10sec by google'ing "FATA Interface"

altho i always read FATASS interface ...
 
I have done some research
FATA is simply the low cost ATA or SATA disk drive equipped with a small external converter, that changes the interface to Fibre Channel
these drives have a 40-pin "SCA-2" disk connector on the hard disk but lack the small external converter, that changes the interface to Fibre Channel

the Drives are Brand new and it seems such a waste to not be able to use them
 
I have done some research
FATA is simply the low cost ATA or SATA disk drive equipped with a small external converter, that changes the interface to Fibre Channel
these drives lack the small external converter, that changes the interface to Fibre Channel
the Drives are Brand new and it seems such a waste to not be able to use them
pics? :D
 
I have done some research
FATA is simply the low cost ATA or SATA disk drive equipped with a small external converter, that changes the interface to Fibre Channel
these drives lack the small external converter, that changes the interface to Fibre Channel
the Drives are Brand new and it seems such a waste to not be able to use them

So what are you waiting for? Hook them up and see if it works.
 
Those FATA adapters just plugged into standard ATA and SATA drives and provided a Fibre interface. That's why if you were lacking the adapter you could just plug them in. Since it's SCA-2 (which was not there when I posted) they're more than likely SCSI or Fibre drives.

sata-to-fiber-channel-hd-interposer-1.jpg


Of course, being HP branded they could have used a traditionally SCSI/Fibre interface in a proprietary way. Pics would go a long way in helping us here! It's not like FATA stayed around for long (SAS was just around the corner)
 
Last edited:
FCA-3000.jpg

This is best pic i can find online showing port on the hard drive
Port is SCA 2

Ignore the card in front of the drive
 
Back
Top