- Joined
- May 27, 2008
- Messages
- 3,628 (0.62/day)
System Name | Ultra 64 |
---|---|
Processor | NEC VR4300 (MIPS R4300i) |
Motherboard | proprietary design |
Cooling | Fanless aircooled |
Memory | 4.5MB 250 MHz RDRAM |
Video Card(s) | 62.5 MHz Reality Coprocessor |
Storage | 32 - 512 Mbit ROM Cartridge |
Display(s) | 720x576 |
Case | Clear Blue Funtastic |
Audio Device(s) | 16-bit CD quality |
Power Supply | proprietary design |
Mouse | N64 mouse for use with N64DD |
Keyboard | N64 keyboard for use with N64DD |
Got a copy of Wario Land for my GameBoy at the weekend and when trying to load it gets stuck at a blank white screen after the initial Nintendo logo.
I've attempted cleaning the pins with isopropyl alcohol and using an eraser. Iv'e also tried opening up the cart and re-flowing the pins. Admittedly i never added new solder (ran out of flux).
Checked all joints under a magnifying glass and can't see any evidence of broken traces or bad joints.
Has anyone had any experience of this kind of behaviour and resolved it?
I haven't tested the battery, multi meter was in the car, but ive not known dead batteries to cause this kind of behaviour.
Thanks.
I've attempted cleaning the pins with isopropyl alcohol and using an eraser. Iv'e also tried opening up the cart and re-flowing the pins. Admittedly i never added new solder (ran out of flux).
Checked all joints under a magnifying glass and can't see any evidence of broken traces or bad joints.
Has anyone had any experience of this kind of behaviour and resolved it?
I haven't tested the battery, multi meter was in the car, but ive not known dead batteries to cause this kind of behaviour.
Thanks.