• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Ghetto Mods

Decided to re-glue the headrest padding on my old Sennheiser HD465, but in order to keep it in place and not fall off on the first try I have to prop those earpieces with some sort of "simulation" of the head....
IMG_20250220_183738.jpg
 
I need to fix a hole in the wall behind vinyl siding. I didn't have a tool to unclip the siding, so I made one. It was faster than going to the hardware store.
 

Attachments

  • IMG_20250320_200028.jpg
    IMG_20250320_200028.jpg
    1.1 MB · Views: 110
I forgot about this glorious topic :D
I've bought new GPU :D
1745574026713.png

I've added aluminium cables to hang it inside the case, but after testing there was not a problem with a saggin that much.
1745574073440.png

I've changed the gpu, and after finally closed my cpu case, that it was no longer ghetto ;(, I've found out that gigabyte can leak thermal compound that is placed all over in gpu, so I've hanged my 9070 XT Gaming OC, so to check if the flow of it is happening in My case :).
1745574185041.png

Now even if something could leak it will flow to the desk not mobo :D
And that's how was created for now "hangingbyte" :D
 
DudeBeFishing said:
This is how you secure tubing parallel to each other when you only have zip ties. I forget who shown me this.
Click to expand...
I'd personally classify this as "not ghetto". I actually do similar with wires and cables at work.
 
wNotyarD said:
I'd personally classify this as "not ghetto". I actually do similar with wires and cables at work.
Click to expand...
I would called it ghetto, have You seen ever waterless wireless cooling setup ? :)
 
I'm back, and I've rotated cpu cooler and my nvme cooler was in a way so I just removed part of it :D
It looked like this

1745956193674.png


Now it looks like this :D
1745956227091.png

1745956247897.png

And here is the rest.
1745956271226.png

Temps are fine cause it's pcie4.0 nvme in pcie3.0 slot :)
 
iolaus said:
Looks like a little Dremel work could enable you to put it back.
Click to expand...
Unfortunately it was really easy to take it out (so it only looks like ghetto mod ;( )
 
Lian Li Lancool 207 has stupid design that is holding cable from cpu, and I've just drilled a hole and set it upside down :D


P5110072.JPG


P5110071.JPG
And now it works as it should :D
 
phanbuey said:
honestly this is such a good idea. there is a real product here that can make money.
Click to expand...
Necessity is the mother of innovation
 
Put an open pod for my car, when I checked the IAT sensor it as warm as stock (which is about 55C) so I done a bit of modding.

getto.jpg


It doesn't look very nice but whatever it works, even during midday where temperature outside is above 40C easily temperature still very cool

ss.jpg
 
20250522_140554 mm.jpg

yea, i'm kinda lazy to buy a new waste ink foam, i use paper then :roll::roll:
 
You must log in or register to reply here.
Back
Top