Kidzoom
New Member
- Joined
- May 12, 2010
- Messages
- 1 (0.00/day)
System Name | NAPCA |
---|---|
Processor | Intel Core i7 920 @ 2.67 GHz |
Motherboard | Dell |
Cooling | Air |
Memory | 12 GB DDR 3 |
Video Card(s) | Quadro 4500 x2 1gb SLI enabled |
Storage | 1 TB Seagate |
Display(s) | Dell 23 Digital |
Case | Dell Studio XPS 435T |
Audio Device(s) | Realtek High Def |
Power Supply | Big |
Software | Windows 7 Ultimate 64 |
I bought a 4500 x2 after market so no one supports me. I hope you can help me. I am not a gamer. I bought the card to help with video clips. The card did not seem to increase performance all that well. I ran "performance 64" and came out on the low end. Ran GPU.Z, it only recognizes one card, and half the memory (but has both cards in the drop down). It registers the fan and GPU temp but zeros on the GPU Load and Memory Contoller Load. It never provides a reading in these categories. According to my system, the card is working fine the driver is up to date 4/29/2010. How can I verify the card is installed, configured and operating correctly?
Dell i7 920 @2.67MHz 12 gb DDR3
Dell i7 920 @2.67MHz 12 gb DDR3