• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Help! Insanely Slow Boot Time!

Joined
Dec 27, 2013
Messages
54 (0.01/day)
System Name Gaming Rig
Processor Intel Core i7-3770k (@3.5Ghz)
Motherboard Gigabyte GA-Z77-D3H
Cooling Corsair Hydro H60 Water Cooling
Memory 16GB Corsair XMS3 (4X4)
Video Card(s) NVIDIA GTX 780 3GB
Storage Samsung 840 Pro SSD 128GB, Seagate 2TB
Display(s) 3x ASUS VS238H 23" Monitors (NVIDIA Surround)
Case Corsair 300R
Audio Device(s) 7.1 Surround Sound
Power Supply Raidmax 850W Gold
Software Windows 7 Home Premium
Hi all,

So I have been having problems with my pc booting from day 1 when I bought it from CyberPowerPC. I have all my drivers installed and Windows 7 running on a 128GB SSD and a 2TB drive for storage. It can take up to 5-10 minutes for my pc to boot, it will get stuck at certain points during booting and I will have to hard boot my pc and switch off the psu and start again. Sometimes it will take just a minute for it to boot, though from my understanding it should be under 10 seconds from an SSD. I am thinking it is a problem with my mobo, please help!

(My full specs are listed under my name on the left hand side)
 
I know when I have my external 2TB drive plugged in, sometimes my boot time slows down. To fix that problem I went into the BIOS and told it to ignore the drive.
You might want to check in your BIOS to see how they have set the boot devices...
But honestly 5-10 minutes probably means something else is slowing it up. At what stage during the boot process does it stall at?
 
Last edited:
With an SSD properly installed it takes between 15 and 30 sec. Properly is the key

Typically when you have a hang on boot. (more than two minutes) its hardware related. Most of the time its a piece of hardware not playing along with the system. Not the motherboard but rather a hot swap drive, printer, USB device or drive, web cam, card reader or something like that. First thing I do is start unplugging stuff and see if it stops

One time it turned out to be the sound card. I disabled the GPU sound and it boot correctly
 
I know when I have my external 2TB drive plugged in, sometimes my boot time slows down. To fix that problem I went into the BIOS and told it to ignore the drive.
You might want to check in your BIOS to see how they have set the boot devices...
But honestly 5-10 minutes probably means something else is slowing it up. At what stage of boot up does it stall at?

It usually stalls at the Gigabyte screen, and I can't access the BIOS because it does nothing when I press the required key.
 
With an SSD properly installed it takes between 15 and 30 sec. Properly is the key

Typically when you have a hang on boot. (more than two minutes) its hardware related. Most of the time its a piece of hardware not playing along with the system. Not the motherboard but rather a hot swap drive, printer, USB device or drive, web cam, card reader or something like that. First thing I do is start unplugging stuff and see if it stops

One time it turned out to be the sound card. I disabled the GPU sound and it boot correctly

I only have my webcam plugged in though?
 
Did it boot correctly when you got it?
 
You have the most recent BIOS update? Are you sure you're pressing the correct key to enter that BIOS? My Asus boots so fast it came with a utility to reboot directly to BIOS. Well with a dual-boot Linux setup I have most of the fast boot stuff disabled but it's still damn fast.

If you're familiar with the machine, maybe reset the CMOS.

Or even just disconnect the 2TB drive and then do a couple of boots and see what happens.

It's something hardware/setting/detect-wise.
 
Very cool HammerON. I can see that over 7 months my PC has gone from 17 sec to 38 sec
 
Did it boot correctly when you got it?

The first time it did, but the second time it got stuck at the Gigabyte screen and I had to hard boot it.
 
You have the most recent BIOS update? Are you sure you're pressing the correct key to enter that BIOS? My Asus boots so fast it came with a utility to reboot directly to BIOS. Well with a dual-boot Linux setup I have most of the fast boot stuff disabled but it's still damn fast.

If you're familiar with the machine, maybe reset the CMOS.

Or even just disconnect the 2TB drive and then do a couple of boots and see what happens.

It's something hardware/setting/detect-wise.

I'm not sure, I don't think that there is an option in the gigabyte drivers for the BIOS..
 
Press it before the splash screen and not fast. If all else fails disconnect the drive and it will ask you

But if its under warranty call them
 
Press it before the splash screen and not fast. If all else fails disconnect the drive and it will ask you

But if its under warranty call them

I bought it a while ago and I have just dealt with it but it had gotten worse, I don't think it's under warranty anymore. I will just disconnect the drive and see what I can do.
 
have you tried to plug out your 2tb hdd, just using your ssd and resetting your bios?
 
I think you might have a memory issue. Have you tried resetting the CMOS? I would also do a BIOS update. You will need to get the most recent one from gigabyte.com. Not from the disc you have given. BIOS updates are not done in Windows, unless that's how Gigabyte wants you to do it.

Im not sure why you didn't just call of CyberpowerPC day one when you were having the issue, let alone, even bothered buying a computer from them.
 
Memory or HDD issue

TRY:
Removing a stick & or
upping the voltage

unplug 2TB drive

Enable staggered spinup in bios (I had to do this)

and see if your boots get faster
 
Ok, I need help getting all the most recent updates for my motherboard. I can't find the BIOS update for my mobo on the Gigabyte website and all of the drivers come in seperate downloads, what a pain! -_-
 
look at the board. Its marked on it. Most likely by the PCI slots close to the edge
 
Have you tried a clean re-installation of windows? it is possible that there may be an update in process getting "stuck" in the installation process.
Also by re installation I mean CLEAN, not a backup OEM copy. I would also disconnect all drives except the SSD which you are installing windows.
 
Have you tried a clean re-installation of windows? it is possible that there may be an update in process getting "stuck" in the installation process.
Also by re installation I mean CLEAN, not a backup OEM copy. I would also disconnect all drives except the SSD which you are installing windows.

Yep I formatted the drive and did a clean install but it did nothing.
 
the bad choice is the cpu that has a gpu inside .
all others cpus you can install are below the one you use . boot is long because the mvp virtue is a chipset that hold the intel gpu and the nvidia . it tries to get the "best" mixing them ..... but nvidia can not bear that way : check hyper sli here and hybrid physx : softwares made to patch nvidia drivers...
change the mobo for a lga 2011 or an amd socket if you want to play games or may be 2 ati 2x0 instead of the nv.
 
My board is revision 1.0
the bad choice is the cpu that has a gpu inside .
all others cpus you can install are below the one you use . boot is long because the mvp virtue is a chipset that hold the intel gpu and the nvidia . it tries to get the "best" mixing them ..... but nvidia can not bear that way : check hyper sli here and hybrid physx : softwares made to patch nvidia drivers...
change the mobo for a lga 2011 or an amd socket if you want to play games or may be 2 ati 2x0 instead of the nv.

The boot was slow before I had a 780, I had a Radeon 6950 2GB instead
 
Back
Top