- Joined
- Jan 24, 2009
- Messages
- 435 (0.08/day)
- Location
- New York
System Name | Unobtainium |
---|---|
Processor | 3600X |
Motherboard | Gigabyte X570S Aorus Elite AX |
Cooling | DH15 Chromax Black |
Memory | 32GB Ripjaws 3200MHz |
Video Card(s) | EVGA 3080 Ti FTW Ultra w/ Alphacool Eiswolf |
Storage | 500GB SN750 | 3.84TB Micron 7450| 4TB SP XS70 |
Display(s) | Asus 144Hz display + LG Ultrafine 4k |
Case | Evolv X |
Audio Device(s) | Schiit Hel + AKG Q701s |
Power Supply | Seasonic FOCUS PX-750 |
Mouse | Logitech G502 Hero |
Keyboard | Filco Majestouch II |
Software | Windows 11 |
ATM I am running my e7300 at 3.8 stable and I was wondering, should I go higher? Maybe 3.9-4.0? But I would need another MASSIVE voltage increase to get to there. Maybe have to go to 1.5v...
Proof:
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio ...........................:9x
Fine CPU Clock Ratio.....................:+0.5
CPU Frequency .............................:3.8
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 400 Mhz
PCI Express Frequency (Mhz) .........: 100
C.I.A.2 ...........................................:[Disabled]
Advanced Clock Control [Press Enter]
? I have not changed anything in here.
DRAM Performance Control
Performance Enhance...................: [Standard]
X.M.P………………………………………………..: -
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ..............:[2.00D]
Memory Frequency (Mhz) ...............:800
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................: 5
tRCD ......................................... 5
tRP'........................................... 5
tRAS.......................................... 18
Advanced Timing Control
Nothing has been changed
Driving Strength Profiles
Driving Strength ............................ [Auto]
Nothing has been changed
Motherboard Voltage Control
Load Line Calibration........................ Enabled
Voltage Type.………... [Manual]
CPU
CPU Vcore….……….........................: 1.4625
CPU Termination…..... ......................:1.32
CPU PLL………………….....................:1.57
CPU Reference.…………........................:0.760V [Auto]
MCH/ICH
MCH Core……………....1.3v
MCH Reference….…….Auto
MCH/DRAM Ref.…...... Auto
ICH I/O……………….....1.570V
ICH Core…………...……1.200V
DRAM
DRAM Voltage ……....2.1v
DRAM Termination .… Auto
Channel A Reference Auto
Channel B Reference Auto
Proof:
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio ...........................:9x
Fine CPU Clock Ratio.....................:+0.5
CPU Frequency .............................:3.8
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 400 Mhz
PCI Express Frequency (Mhz) .........: 100
C.I.A.2 ...........................................:[Disabled]
Advanced Clock Control [Press Enter]
? I have not changed anything in here.
DRAM Performance Control
Performance Enhance...................: [Standard]
X.M.P………………………………………………..: -
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ..............:[2.00D]
Memory Frequency (Mhz) ...............:800
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................: 5
tRCD ......................................... 5
tRP'........................................... 5
tRAS.......................................... 18
Advanced Timing Control
Nothing has been changed
Driving Strength Profiles
Driving Strength ............................ [Auto]
Nothing has been changed
Motherboard Voltage Control
Load Line Calibration........................ Enabled
Voltage Type.………... [Manual]
CPU
CPU Vcore….……….........................: 1.4625
CPU Termination…..... ......................:1.32
CPU PLL………………….....................:1.57
CPU Reference.…………........................:0.760V [Auto]
MCH/ICH
MCH Core……………....1.3v
MCH Reference….…….Auto
MCH/DRAM Ref.…...... Auto
ICH I/O……………….....1.570V
ICH Core…………...……1.200V
DRAM
DRAM Voltage ……....2.1v
DRAM Termination .… Auto
Channel A Reference Auto
Channel B Reference Auto