I7-6700K Delidding

[TxGrin]

I delided my i7-6700k and run at 5.0 Ghz with 1.385v temps stay below 70c after using liquid metal and a H115i Liquid cooler here is the screen shot. Been running for a week now with no issues
My benchmark is above a i9-9900K guess im lucky to have a good chip that is stable to run at this speed with lower voltage and low temp. I think the key to delidding was using very little glue while reattaching the heat spreader. Only put a very tiny dot of glue on just the flanges so that the heat spreader was sitting on top of the die and there was no gap created by the glue raising the heat spreader.

Intel Core i7 6700K @ 5001.2 MHz - CPU-Z VALIDATOR

[gdzq7x] Validated Dump by i7-6700 Delid @ 5Ghz (2019-10-24 23:08:15) - MB: Gigabyte Z170X-Gaming 7 - RAM: 32768 MB

valid.x86.fr

https://valid.x86.fr/m28l1m Running at 5051.25 MHz (50 * 101.03 MHz)

Here's my Furmark scores with the 2 Nvidia 2080 Super with Nlink I would say they run quite well with i7-6700k Over Clocked to 5Ghz under stress test i get max 157 Deg F and 69C

GPU scores database

 

[thesmokingman]

Yea, that is a golden chip. It's rare for 6700K to hit 5ghz. My 6700K tops out around 4.9ghz and that is a bit uncomfortable with voltage so I only go to 4.8hz. Grats dude.

 

[TheMadDutchDude]

That is definitely a great chip. Lucky you!

 

[TxGrin]

Built a new i9-9900KS

Intel Core i9 @ 5302.86 MHz - CPU-Z VALIDATOR

[cs4dc6] Validated Dump by DESKTOP-SLI (2019-11-03 15:48:39) - MB: Gigabyte Z390 AORUS MASTER-CF - RAM: 32768 MB

valid.x86.fr

GPU scores database