• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Init display first on SLI mode? which to choice?

israrami

New Member
Joined
Aug 11, 2018
Messages
19 (0.01/day)
Location
Israel, Tel Aviv
Processor INTEL I7 3770K 3.5Ghz @ 4.5
Motherboard Z77X-UD5H
Cooling Antec Mercury 360 Liquid Cooling
Memory 8GB x 4 G.Skill 2400Mhz
Video Card(s) GIGABYTE 980GTX G1 GAMING 4GB OC
Storage Samsung EVO850 250GB , 8TB X 2 SEAGATE 7200RPM - (need arrived)
Display(s) LG 24MP58VQ-W - WHITE
Case Fractal Design Define R5 - WHITE
Power Supply Seasonic PRIME Ultra Titanium 1000W - (need arrived)
Mouse Logitech G500s
Keyboard Logitech G510
Software WIN10 Pro
i have 980GTX in SLI i wonder to know in bios ,what to choice?
PEG
PCI
IGFX
or Leave it on Auto ?

thank you for help
 
PEG (it's general/short term for "PCI-e GPU").
PCI is good if you want to diagnose PCI-e card with PCI (non-e) one.
iGFX is simply integrated one (if you set that as first, you may have to connect monitor to motherboard to get any video signal).
 
PEG (it's general/short term for "PCI-e GPU").
PCI is good if you want to diagnose PCI-e card with PCI (non-e) one.
iGFX is simply integrated one (if you set that as first, you may have to connect monitor to motherboard to get any video signal).

ok thank you for answer and if you have SLI what you was Choice?
 
Voodoo 2 SLI = PCI (or AGP if your third card uses that ;)),
GeForce SLI = PEG,
Hybrid SLI (or for FreeSync using GeForce card ?) = iGPU.
 
Last edited:
thank you all
 
Back
Top