intel core i7 Owners Club

[P4-630]

@overclocking101 & @P4-630 what about intel Core i5 owners club?

Done!

 

[jaggerwild]

3930K

3770KV

6700K@4800V
http://hwbot.org/submission/3147885_

 

[peche]

 

[peche]

Well another delid!
this Saturday my friend asked for a delid, he also has the same i7 I own, intel i7 3770, he is running a custom Waterlop, XSPC 280mm Rad, XSPC waterpump& reservoir Combo, XSPC raystorm Waterblock and tubing, temps were reaching 65c on max, then I did delid, repaste and some Unigine Valley Benchs, now temps are on 54C max, also idle and minimal temps are 28, before the delid process, temps on idle were 34&38c mostly,


here are some Pics!

This is for the crappy paste intel uses on their Processors instead the soldering!

Edit: sorry for the filthy hardware, owner didn't have time for cleaning his rig...

Regards,

 

[Mussels]

how hard is it to delid the 3770? was just given one and it hits 90C where my 2500k hit 60C at the same volts :/

had to back down the OC a lot because the temps are just too high

 

[Jetster]

I went from a AMD Athlon 1.2ghz, AMD Athlon 64 3800+, i5 2500k, i7 3770K then i7 4790K. I don't see the point in deliding unless it just for the heck of it. Pretty happy with the i7s performance

 

[Mussels]

I went from a AMD Athlon 1.2ghz, AMD Athlon 64 3800+, i5 2500k, i7 3770K then i7 4790K. I don't see the point in deliding unless it just for the heck of it. Pretty happy with the i7s performance

mine runs 30C hotter than hte 2500K i had before it. That seems a good reason.

 

[Mussels]

delidded the 3770k

9C drop under load, IBT results actually slightly faster + more consistent. Not sure why, but i guess lower temps helps out.






before


after (paste seems to be settling in, initially was 9C drop now seems higher. imagine if i had coolab liquid pro or something else equally shiny)

 

[peche]

how hard is it to delid the 3770? was just given one and it hits 90C where my 2500k hit 60C at the same volts :/

had to back down the OC a lot because the temps are just too high

actually i haven't delidded a 3770K but i have delided 4790K and 4770K, they seemed to be soldered compared the easy process of delidding an 3770, its pretty simple to do,

I went from a AMD Athlon 1.2ghz, AMD Athlon 64 3800+, i5 2500k, i7 3770K then i7 4790K. I don't see the point in deliding unless it just for the heck of it. Pretty happy with the i7s performance

pretty much people just wants better temps, i love lower temps on every device i have...

mine runs 30C hotter than hte 2500K i had before it. That seems a good reason.

this

delidded the 3770k

9C drop under load, IBT results actually slightly faster + more consistent. Not sure why, but i guess lower temps helps out.






before


after (paste seems to be settling in, initially was 9C drop now seems higher. imagine if i had coolab liquid pro or something else equally shiny)

Thanks ofr sharing all the process and results,
Which paste did you use in this one? on CPU Die and I.H.S. ?

Regards,

 

[Mussels]

Thanks ofr sharing all the process and results,
Which paste did you use in this one? on CPU Die and I.H.S. ?

Regards,

I ran out of everything else before trying this, so an old tube of arctic cooling MX 2. looking at a new tube of MX4 for the cooler and coolab ultra for the IHS (the liquid copper stuff) in the near future.

 

[peche]

I ran out of everything else before trying this, so an old tube of arctic cooling MX 2. looking at a new tube of MX4 for the cooler and coolab ultra for the IHS (the liquid copper stuff) in the near future.

all my delids are made with Coollaboratory Liquid Ultra on CPU Die and Arctic MX 4 over CPU I.H.S, ill like to switch to Thermal Grizzly Conductnaut on CPU die and Kyronaut over CPU I.H.S..

 

[Mussels]

i have never heard of thermal grizzly before today. the coolab ultra is about $15 shipped, so that and MX4 seems financially viable - and the coolab should help lock the IHS in place too.

this GIF is amazing btw
http://i272.photobucket.com/albums/jj163/idontcare_photo_bucket/Intel Core i7-3770K/SpinningIHSshortfinal.gif


edit:

this genius went all out with his delidding thread, proving that the gap between the IHS and CPU die is what really lowers the temps, not the paste.

http://forums.anandtech.com/showthread.php?t=2261855&page=23

(about 3 posts down you can see the results of IC diamond TIM damaging someones CPU/waterblock, god that stuffs a nightmare)

 

[peche]

and the coolab should help lock the IHS in place too.

no, i was re-pasting my cpu, then took out the waterbloock, and also CPU socket tray, when pull the cpu i just got the IHS, CPU PCB was in the socket tray, had to clean all the mess and did a repaste of liquid metal again,
i guess you have to gueback the IHS with something like arctic alumina glue....

this GIF is amazing btw
http://i272.photobucket.com/albums/...Intel Core i7-3770K/SpinningIHSshortfinal.gif

Lol

i have never heard of thermal grizzly today. the coolab ultra is about $15 shipped, so that and MX4 seems financially viable

thermal grizzly is new for me, @GreiverBlade and also @P4-630 are the ones who introduced me to this new product, they could give great coments about it,
the fact that Arctic Cooling MX4 and also MX2 is so cheap makes me love it more!
Coollaboratory may be purchases from amazon / ebay since there is no way to purchase it here in CR,
Sometimes some stores have on stock Arctic Cooling MX4 4gr syringes, Arctic silver5 3.5g syringe, and some other great or decent TIM's



Regards,

 

[dorsetknob]

i love lower temps on every device i have...

even your Hot pockets toaster

 

[GreiverBlade]

thermal grizzly is new for me, @GreiverBlade and also @P4-630 are the ones who introduced me to this new product, they could give great coments about it,
the fact that Arctic Cooling MX4 and also MX2 is so cheap makes me love it more!
Coollaboratory may be purchases from amazon / ebay since there is no way to purchase it here in CR,
Sometimes some stores have on stock Arctic Cooling MX4 4gr syringes, Arctic silver5 3.5g syringe, and some other great or decent TIM's



Regards,

i positively love my 6600K with TG Hydronaut, still have all TIM of the TG line (Aeronaut/Hydronaut/Kryonaut/Conductonaut) but for now i stay with that one (will probably find a spare 6600K if i want to attempt a delid and test the Conductonaut )

price to perf king is still MX-2 and MX-4 these 2 are unbeatable ... (with GC-Extreme if the price is close to the MX-4 )

even your Hot pockets toaster

nah for that i would use Arctic Silver 5 ....... errr on a side-note ... i wouldn't even use AS5 for that ... too bad, my unopened AS5 tube will have to stay as it is (still have a half one that i use for TIM comparison when i get a new one ... tho since the MX-2 ... AS5 lost big time )

 

[P4-630]

i have never heard of thermal grizzly before today.

http://overclocking.guide/thermal-p...d-with-air-cooling-and-liquid-nitrogen-ln2/6/

 

[peche]

even your Hot pockets toaster

Spoiler: somthing like this...

 

[Mussels]

right well my coolaboratory ultra arrived, time to disassemble my PC and get some metallic dangerpaste under my IHS

 

[hat]

Would you mind comparing temps with the 3770 and 2500 at the same clocks and volts? Also keep in mind that 3770 has ht and the 2500 does not, that'll push temps higher too.

 

[Mussels]

Would you mind comparing temps with the 3770 and 2500 at the same clocks and volts? Also keep in mind that 3770 has ht and the 2500 does not, that'll push temps higher too.

i've got the 2500k and compared many times, since that was my upgrade path. due to the solder under the IHS, the 2500k runs upto 40C cooler with the stock IHS setup, despite the higher volts/wattages.

It's not a joke to say i've seen 40C higher temps on this 3770k, despite the lower volts/watts (hence the DANGERPASTE! i'm in the middle of doing)

 

[hat]

I'd probably be doing the same thing. I'm just curious to see how the thermals are once you get done with your project compared to the 2500.

 

[Mussels]

well its done, although i think this stuff needs a burn in time.

things so far:

This is a high heat stress test. Its not what i'll run it at 24/7, it was just the max stable OC i got running with a high safe voltage to compare coolers.

4.6GHz +0.1v offset (may need less, i forgot what volts it was at after bios reset)
82/88/85/89C max temps on all cores in realtemp. MX-4 was seeing 97C.

core 2 previously had a 7C difference to 3 and 4, now its 1-3C. Thats a big change since core 2 would trip throttle faster than the others.

2500k can do 4.7GHz at higher volts and run 60C (same cooler) the soldered IHS and physically larger die hugely skews it in its favor.

 

[peche]

i'll like

right well my coolaboratory ultra arrived, time to disassemble my PC and get some metallic dangerpaste under my IHS

to see pics!

 

[Mussels]

i'll like

to see pics!

i was showing someone else how to do it, and totally forgot to take them. was a very uneventful build, other than the shiny paste.

looked just like this, stuff was like a thick mercury

 

[peche]

i was showing someone else how to do it, and totally forgot to take them. was a very uneventful build, other than the shiny paste.

looked just like this, stuff was like a thick mercury

that 3770 is from costa rica or is the malay batch?
nice well done! coollab ultra?