• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Is 1.304 to 1.310 voltage safe for overclocking an I7 2600k?

Joined
Mar 2, 2013
Messages
529 (0.13/day)
Location
st. louis missouri
Processor Ryzen 5 5600
Motherboard Asus b450F ROG Strix
Cooling 3 case fans plus deepcool maxx V2 cpu heatsink
Memory 16 GB Crucial Ballistix DDR4
Video Card(s) Zotac RTX 3060 TI
Storage 3 SSD's, 1 Samsung 970 Evo NVME and 2 sata (Crucial 1 TB and ADATA 480 GB) and 2 sata hardrives
Display(s) 27 inch Asus 75hz gaming monitor
Case NZXT h500i black
Power Supply Corsair cx650m 650 watt psu
Mouse Corsair M65 Pro RGB
Keyboard Inland RGB mechanical keyboard with blue optical switches.
Software windows 10 64 bit
Hello, I am currently my I7 2600k at 4.2 ghz with 1.3 voltage inside of the Bios. It seems to be stable. My question is this voltage safe? I have a screen shot from Cpu z attached with this post.

Thank you.
 

Attachments

  • i7 2600k voltage.PNG
    i7 2600k voltage.PNG
    870.7 KB · Views: 365

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,966 (1.12/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
Absolutely. Mine ran 4.6@1.35 and still does today for my friend who inherited it. So you could probably lower the voltage or OC further.
 
Joined
Mar 2, 2013
Messages
529 (0.13/day)
Location
st. louis missouri
Processor Ryzen 5 5600
Motherboard Asus b450F ROG Strix
Cooling 3 case fans plus deepcool maxx V2 cpu heatsink
Memory 16 GB Crucial Ballistix DDR4
Video Card(s) Zotac RTX 3060 TI
Storage 3 SSD's, 1 Samsung 970 Evo NVME and 2 sata (Crucial 1 TB and ADATA 480 GB) and 2 sata hardrives
Display(s) 27 inch Asus 75hz gaming monitor
Case NZXT h500i black
Power Supply Corsair cx650m 650 watt psu
Mouse Corsair M65 Pro RGB
Keyboard Inland RGB mechanical keyboard with blue optical switches.
Software windows 10 64 bit
Ok thanks, I was using auto tuner to overclock previously but my OC became unstable. I am going to keep it as is for the time being. I might OC further in the future though.
 
Joined
Dec 18, 2012
Messages
392 (0.09/day)
Processor Ryzen 7 5800x @ 4,85Ghz
Motherboard AORUS MASTER X570
Cooling Costume External Water Loop 1080 Rad
Memory Patriot Viper Steel DDR4-3600 16GB @3800 mhz cl16
Video Card(s) RTX 3090 Water
Storage Raid0 4 x Sasmsung 850 EVo, 980 1TB M.2
Display(s) ASUS Swift
Case Open test bench
Power Supply Be quiet! 850 P10
Mouse G703
Keyboard Old USB Dell Keyboard x2
VR HMD Rift S
Software Windows 11
Hello, I am currently my I7 2600k at 4.2 ghz with 1.3 voltage inside of the Bios. It seems to be stable. My question is this voltage safe? I have a screen shot from Cpu z attached with this post.

Thank you.
Mine ran for 8 years with about 1,38-1,4V 24/7 but under costume water cooling never got warmer then like 65C°.
These chips can take up 1.45V. Mine did 4,9ghz. Wouldn't go above 1.4v for daily usage.
 
Joined
Jul 5, 2013
Messages
25,559 (6.47/day)
Hello, I am currently my I7 2600k at 4.2 ghz with 1.3 voltage inside of the Bios. It seems to be stable. My question is this voltage safe?
As has been mentioned already, you're good. That's barely a bump at all. That CPU can safely run on up to 1.375v, but beyond that you'll be pushing the limits of what can be maintained long-term without damage to the CPU.
 
Joined
Dec 31, 2009
Messages
19,366 (3.70/day)
Benchmark Scores Faster than yours... I'd bet on it. :)
Asking over 0.06V....?? It naturally fluctuates that much... no worries.

Keep that thing under 1.4V or so and it's fine. Older process can handle the voltage better than these new smaller chips in most cases.
 
Top