kureng
New Member
- Joined
- Apr 6, 2007
- Messages
- 100 (0.02/day)
Processor | AMD64 X2 5000 BE OCed 3.0Ghz |
---|---|
Motherboard | MSI K9A2 CF A790X |
Cooling | CoolerMaster Gemin II |
Memory | 2GB Corsair XMS2 6400C4 DDR2 OCed 1000Mhz CL 4-4-4-13 |
Video Card(s) | HIS ATI Radeon HD3870 ICEQ3 512MB GDDR4 |
Storage | WD 500GB SATA2, Seagate 250GB SATA2, Seagate 160GB SATA2 |
Display(s) | Viewsonic LCD 17inch |
Case | CoolerMaster RC-690 |
Audio Device(s) | Realtek High Definition ALC888 |
Power Supply | CoolerMaster Extreme Power |
Software | Windows Vista Ultimate x86 SP1 |
i just bought the MSI K9A2 CF, and got only one gc: HD3870 IceQ3
The problem is that the first PCIE slot to near with the SATA port, if i place the GC at the first, i cannot get 2 out of 4 SATA port. I need all 4 SATA port to be used. So, i put the GC in the second slot, boot up and it run properly. When check at CCC, "current bus setting: PCI Express 2.0 x8". How can i change it to run at x16 speed??
The problem is that the first PCIE slot to near with the SATA port, if i place the GC at the first, i cannot get 2 out of 4 SATA port. I need all 4 SATA port to be used. So, i put the GC in the second slot, boot up and it run properly. When check at CCC, "current bus setting: PCI Express 2.0 x8". How can i change it to run at x16 speed??