Richieb0y
New Member
- Joined
- Mar 24, 2007
- Messages
- 471 (0.08/day)
- Location
- The Netherlands Almere
System Name | Made by Richieb0y |
---|---|
Processor | Intel I7 860 2,8 Ghz |
Motherboard | Asus P7P55D |
Cooling | CrosAir H50 |
Memory | Crosair XMS DDR3 1600Mhz 8GB |
Video Card(s) | Sapphire 6950 2G >>> 6970 [C 880mhz\M 1375mhz] |
Storage | SSD OCZ Vertex 60GB AHCI + Seagate Barracuda 250GB 16Mb + WD Caviar SE16 250GB 16Mb Raid0 |
Display(s) | 21' Samsung LCD TV/Monitor 1650x1050 |
Case | Cooler Master CM 690 4x 12cm / 2x 12cm Outtake / Titan Slotcooller 8cm |
Audio Device(s) | Onboard |
Power Supply | CorsairTX, 650 Watt |
Software | Windows 7 Ultimate E x64 |
Benchmark Scores | 18606 3DMarks06 P18690 3DMarksVantage P4966 3DMarks11 |
hi all yesterday i bought this thing i have setup everthing.
TV /cable reciever/AVR now the probleem comes my xbox wont powerup it does tru the device menu but not when push play xbox the TV/AVR do go on but just not the xbox.
thats probleem 1
Probleem 2 is if everthing is turned off and i want 2 watch TV so i push Activities and watch tv now my digi cable reciever gets on and the tv BUT it never jumps on the right Ext
i have it on Ext1 but it always jumps to Ext2 AV S/video or comp1 same goose for my xbox
it never jumps on comp1.
Now logitech has a VERY usefull tool on the remote called HELP!!!
so now my tv is on ext2 and push help it wil ask when its on ext1 yeaa it workd....NOT
because now i want to xbox so it should pop on comp1 but it doesnt do that so again i use help. then i come on comp1 i can xbox now but it wont save
it wont save so that
TV = Ext1
xbox=comp1
so when i put tv again on i have to go tru help again same for the xbox
i want to smack this thing so hard but it cost me 60euries
sry my f***up English but plzz help if you can thx
TV /cable reciever/AVR now the probleem comes my xbox wont powerup it does tru the device menu but not when push play xbox the TV/AVR do go on but just not the xbox.
thats probleem 1
Probleem 2 is if everthing is turned off and i want 2 watch TV so i push Activities and watch tv now my digi cable reciever gets on and the tv BUT it never jumps on the right Ext
i have it on Ext1 but it always jumps to Ext2 AV S/video or comp1 same goose for my xbox
it never jumps on comp1.
Now logitech has a VERY usefull tool on the remote called HELP!!!
so now my tv is on ext2 and push help it wil ask when its on ext1 yeaa it workd....NOT
because now i want to xbox so it should pop on comp1 but it doesnt do that so again i use help. then i come on comp1 i can xbox now but it wont save
it wont save so that
TV = Ext1
xbox=comp1
so when i put tv again on i have to go tru help again same for the xbox
i want to smack this thing so hard but it cost me 60euries
sry my f***up English but plzz help if you can thx