• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Looking for a bios backup of RTX 4090 Phantom

Hi, I'm looking for the performance bios of the Gainward 4090 GS. Could someone share it?
Thank you
 
I think your all slightly mad to be playing with these expensive cards. Just enjoy all the frames!
 
jootn2kx said:
Great let me know if you get the Asus strix bios to work with the 133% powerslide
Click to expand...
I am back after getting this Corsair cable I am able to unlock 133%. Short story 3x8pin to 12+4pin adapter has sense pins empty. Corsair cable has attached these cables and after reflash of bios, it works ok. I tested only this on hardware and I see 600W. I will check it more tomorrow to be sure that this is a physical increase of power and not only in software. But now looks like this is working.
I also attached my BIOS from stock. And Strix BIos that I use. I also know that the Strix board can deliver like 70 amps and the phantom board can deliver around 54 amps. So I will test it and replay if it gain any performance near Strix or Suprim or Gainward Phantom GS

Works fine but temps are like 5-10 bigger on core
 

Attachments

  • 1670010250110.png
    1670010250110.png
    3.5 MB · Views: 223
  • 4090_phantom_performance_from_card.rom
    4090_phantom_performance_from_card.rom
    2 MB · Views: 92
  • 4090_phantom_silent_from_card.rom
    4090_phantom_silent_from_card.rom
    2 MB · Views: 81
  • Asus.RTX4090.24576.220817.rom
    Asus.RTX4090.24576.220817.rom
    2 MB · Views: 69
  • phantomgs4090.rom
    phantomgs4090.rom
    2 MB · Views: 66
  • 55A6E932-C66C-48A2-8C4B-B7B604A1053F.jpeg
    55A6E932-C66C-48A2-8C4B-B7B604A1053F.jpeg
    1.4 MB · Views: 240
  • 9913D758-D5C3-4061-A064-2E60CD7368DD.jpeg
    9913D758-D5C3-4061-A064-2E60CD7368DD.jpeg
    3.2 MB · Views: 217
  • 00238455-8192-42A5-95B8-EB6FDA40BAC7.jpeg
    00238455-8192-42A5-95B8-EB6FDA40BAC7.jpeg
    1.5 MB · Views: 218
  • 45191043-7B7C-4D96-99A5-A68C7209AF98.jpeg
    45191043-7B7C-4D96-99A5-A68C7209AF98.jpeg
    1.3 MB · Views: 220
  • FC88E0E8-FDB0-4AF3-95D0-181D81295625.jpeg
    FC88E0E8-FDB0-4AF3-95D0-181D81295625.jpeg
    945.8 KB · Views: 235
  • 1670011056859.png
    1670011056859.png
    4.3 MB · Views: 233
killzone_sx said:
I am back after getting this Corsair cable I am able to unlock 133%. Short story 3x8pin to 12+4pin adapter has sense pins empty. Corsair cable has attached these cables and after reflash of bios, it works ok. I tested only this on hardware and I see 600W. I will check it more tomorrow to be sure that this is a physical increase of power and not only in software. But now looks like this is working.
I also attached my BIOS from stock. And Strix BIos that I use. I also know that the Strix board can deliver like 70 amps and the phantom board can deliver around 54 amps. So I will test it and replay if it gain any performance near Strix or Suprim or Gainward Phantom GS

Works fine but temps are like 5-10 bigger on core
Click to expand...
Your new cable has two eight-pin cables, each receiving 300w, I imagine. my source is older and I doubt that it gives me 300w by cable, so I think that cable is not worth it
 
jootn2kx said:
Okay so out of curiosity I flashed the non gs card with the gigabyte OC bios last night.
It seems like I prefer the gigabyte one because it's giving a bit higher core clocks with lower power usage.
Seems like the gigabyte bios is a bit more refined, just my 2 cents.

Thanks for testing this out previously
Click to expand...

Necroposting but are you still running the gigabyte bios? Does it actually pull more than 450w now?

My Phantom (nonGS) is undervolted / oc'd 1V @ 2835mhz. Curious if with Gigabytes bios I could possibly push it a bit more
 
You must log in or register to reply here.
Back
Top