- Joined
- Nov 17, 2010
- Messages
- 166 (0.03/day)
System Name | Render Box |
---|---|
Processor | AMD Ryzen 7 1700x |
Motherboard | ASUS Crosshair VI Hero |
Cooling | Corsair H100i v2 |
Memory | 32 Gigs Trident Z@2400 cl15 |
Video Card(s) | Dual XFX RX 480 8gig |
Storage | 2x1TB Seagate Barracuda,2TB Seagate Barracuda, 250g Seagate Barracuda, 240g HyperX Predator M.2 |
Display(s) | ACER 23.5, HP LE1911 x2 |
Case | Modded Raidmax Agusta |
Audio Device(s) | Realtek 12 Series HD Audio |
Power Supply | Corsair CX750M |
Mouse | Logitech G602 |
Keyboard | CM Storm |
Software | Windows 10 x64 |
So i purchased 16 gigs of Avexir Core series @ 2133 (AVD3U21331104G-2CI ) and i cant seem to get it to run past 1600. The board specs state that i can use up to 2100 (OC). In the bios i can go up to 2400 by just changing the speed (800,1066,1333,1600,2133,2400- these are my available options in the window). I tried using the profile and nothing. Tried manual settings, nothing. Manual timings, voltage....nada. Got it to run at 1760 and i got a blue screen when i put a load on the system. Running at 1600 its slightly faster then my Corsair vengeance cl9, so its a slight improvement.
As of now everything basically is stock except the CPU multiplier and voltage.
NB2200
HT2600
4Ghz (20x multiplier) 1.275v (Yes i know thats undervolted but it runs stable. When i changed to manual overclock the voltage changed to a lower setting. I never noticed, and it didnt lock up, so i left it alone.)
So my question is---Is my CPU voltage keeping me from getting my ram to run at its speed? Is there a certain voltage i need to run my NB or CPU at to get ram to run over 1600 on these AMD systems? Or did i just get a garbage set of ram? You think it would run fine at 1866....but nope. 1760 is all i can get. Any suggestions?
Im guessing i should bring my cpu voltage up to 1.4 where is states it should be. But i doubt its just that easy...
As of now everything basically is stock except the CPU multiplier and voltage.
NB2200
HT2600
4Ghz (20x multiplier) 1.275v (Yes i know thats undervolted but it runs stable. When i changed to manual overclock the voltage changed to a lower setting. I never noticed, and it didnt lock up, so i left it alone.)
So my question is---Is my CPU voltage keeping me from getting my ram to run at its speed? Is there a certain voltage i need to run my NB or CPU at to get ram to run over 1600 on these AMD systems? Or did i just get a garbage set of ram? You think it would run fine at 1866....but nope. 1760 is all i can get. Any suggestions?
Im guessing i should bring my cpu voltage up to 1.4 where is states it should be. But i doubt its just that easy...
Last edited: