• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Memory strap??

Th3-R3as0n said:
Lol ok thanks.. i will try those timings today.. But the problem is in my bios i get more than just 5 or 6 DRAM timings i get about 15???
Click to expand...

Just match them against cpu-z. The first 4 in cpu-z are what you want to change, so look for those settings in your bios.
 
Ok ill give that a try and give you hte results a little later..
 
Ok those timings dont POST.. Any ideas E?
 
Did you raise the Vdimm (memory voltage) to 2.1V. (I believe you can actually raise them to 2.2V with the OCZ, and still be covered under warranty)
 
Yeah i raised voltage to 2.1 and it didnt post..
 
Try 2.2V
 
OK i have been Experiencing stability problems with te Ram and have set them to default timngs and speeds and have not had problems since..

I have a couple of pictures here of the Ram timings in the bios of which i have no idea what half of them are. Could anyone recommend some timings for my Ram as i feel it can be overclocked to a stable and fast level.

Any suggestions welcome :toast:


 
Any1 have any suggestions?
 
Try amd overdrive, this will help alot. Just change it to advance mode (r. Then go to performance control, then memory. Now i would only change the: RAS to CAS delay, RAS Active and RowPrecharge Time.
 
I dont have an AMD 7 series chipsset.. So i cant use AMD overdrive
 
OK coming back to this thread i need you guys to give me some instructions on how to do this overclock succesfully i have a pic of the timings in memset and cpu-z.

Now i know that i can get more than what i am getting now. but when i push the FSb i either dont boot or encounter crashes.
How could i reach a very high but stable overclock.

 
Last edited:
Th3-R3as0n said:
OK coming back to this thread i need you guys to give me some instructions on how to do this overclock succesfully i have a pic of the timings in memset and cpu-z.

Now i know that i can get more than what i am getting now. but when i push the FSb i either dont boot or encounter crashes.
How could i reach a very high but stable overclock.

http://img231.imageshack.us/my.php?image=cpuzmemsettw6.png
Click to expand...
That image is a little too small for me to read. Try hosting it on the tpu image server instead. It's infinitely better than imagesh*t. http://www.techpowerup.org/
 
You must log in or register to reply here.
Back
Top