• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Missing 12v entries in log file. Is this normal? Have intermittent BSOD/WHEA errors.

B

BobC0728

Joined
Jun 1, 2023
Messages
5 (0.01/day)
System Specs
Processor AMD 5900x
Motherboard Gigabyte X570S Aorus Master
Cooling Arctic LF II 280
Memory Corsair Vengeance 2x16 3600 CL18 - CMK32GX4M2Z3600C18
Video Card(s) MSI RTX 3080 Ventus 3X OC 12GB LHR
Storage WD Black SN850x - 1TB
Display(s) 2 x Dell S2721DGF, 2 x ViewSonic VG2453
Case Lian Li 216 (non-RGB)
Power Supply RM850x
Mouse Razer Deathadder v2
Keyboard Logitech cheap keyboard have used for years, like the feel...lol
Software Windows 10
1685575196119.png
 
Get hwinfo64 please
 
I have HWinfo, so you are saying don't rely on GPU/Z for logging?
 
Verify parity, have you looked at event viewer and what the bsod code is?
 
Not sure what you mean by "verify parity".

Event viewer shows WHEA 18 errors of two kinds:
Cache Hierarchy Error
Bus/Interconnect Error

Sometimes one, sometimes the other, sometimes both on each failure, sometimes two of each type.

These are the 8 failures I have had and the type of error on each failure and the APIC ID. Each row is a failure.

Capturexxx.PNG
 
Welcome to TPU, if you could fill in your system specs that would be helpfull :)
 
Hugis said:
Welcome to TPU, if you could fill in your system specs that would be helpfull :)
Click to expand...
Just did, I might add that I am changing my memory today. I have read so many posts all over the interwebs that Corsair Vengeance LPX sometimes does not play nice with AMD Ryzen processors and the latency is not great 18-22-22-42. I have some G.skill F4-3600CC16D-32GTZN arriving today and I will drop that in. 16-16-16-36, 3600.

I might add that I did have CableMod PCIe cables in the system driving the RTX 3080 (full cables, not extensions). I took those out and put back in the Corsair RM850x supplied cables. One for each 8 pin (no daisy chain). And so far I have not had a BSOD....hmmmmmmm.

If someone could answer my original question would be great. Is it normal for GPU/Z to miss log entry sensor values or is it possible based on some other reason?
 
did ya try to log again after no moar bsods with the new memkit ?

sorry i mixed the cablemod no more bsods with memory
 
Last edited:
basco said:
did ya try to log again after no moar bsods with the new memkit ?
Click to expand...
Memory is arriving today vis USPS, not installed yet.
 
When you created that log, did you have other monitoring software running in the background? It's possible that the concurrent sensor access results in failed readings.

They aren't an indicator of system stability (at least afaik)
 
You must log in or register to reply here.
Back
Top