• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Must Have Programs and Links for Overclockers!

Status
Not open for further replies.
Thanks for the links pt! :)
Added!

pt said:
this thread will be very usefull as soon as it is finished ;)
Click to expand...
This thread will be useful forever I think.
Of course I check sometimes some links if they are broken and edit the posts if it is necessary.
If someone knows some modding sites then he/she should post info!
 
Last edited:
there are also the Hitachi hdd's ;)
 
Humm... as for benchmarks you're missing Sciencemark 2 which is very popular around these boards ;)
 
Last edited:
no orthos sp2004?
 
EDIT--- NM this post, i didn't see that is just OC apps you want to make a list of...

Here are a couple on my list...

MHDD - http://hddguru.com/content/en/software/2005.10.02-MHDD/

MHDD is the most popular freeware program for low-level HDD diagnostics.

MHDD supports these interfaces: IDE, Serial ATA, SCSI. Also there is a possibility to access an USB storage, there are drivers for emulation (USB->SCSI).

This software can make precise diagnostic of the mechanical part of a drive, view SMART attributes, perform Low-level format, bad sector repair, different tests and tens of other functions.

---------------

HDDScan - http://hddguru.com/content/en/software/2006.01.22-HDDScan/

HDDScan is a freeware program for low-level HDD diagnostics.

HDDScan supports IDE/SATA/SCSI hard disk drives, RAID arrays, external USB/Firewire hard disks, flash cards.

The program can scan the surface, view SMART attributes, adjust AAM, APM (Power Management), etc.

---------------

Magic Boot Disk v2.0 © HDDGURU - http://hddguru.com/content/en/software/2006.02.10-Magic-Boot-Disk/

This MS-DOS boot disk contains the following:

* Based on Windows 98 Second Edition boot disk
* Drivers for IDE and SATA CDROM
* Fixed FDISK.EXE: Support of hard disk drives bigger than 137 GB
* Patched FORMAT.COM:
o Option /Q (QuickFormat) now can be used to format floppies and hard disks quickly even if they're never been formatted before
o MS-DOS version check has been removed
* SmartDrive (SMARTDRV.EXE) and other basic MS-DOS stuff such as SYS, ATTRIB, DELTREE, LABEL, MEM, MOVE.
* MHDD 4.6 with SCSI/ASPI and ATAPI support and Primary IDE enabled
* USB Mass Storage support drivers for MHDD

---------------

7z - http://www.7-zip.org/

Another compession program, also used in benches.
 
Last edited:
Active@ makes bloddy nice apps...there are the cheapest, and can do a 10000% better job thans those companyies that charge of thousands to do...

there boot disk is the best!

http://www.ntfs.com/boot-disk.htm

also Magic boot disk, and Hirens (best diagnostic disk of the best apps, but warez :( )
 
hmm both for DOS partition recovery are the same price... but yeah I see it is for oc apps .... still good links :toast:
 
If you want file recovery, go with Active@ File Recovery v7.1 for windows...i am able to pull more data out of that, than what ontrack software has to offer...almost 2-3 times more!
 
MrSeanKon said:
The program is already in the list.
Urlyin and ktr thanks for posting here but these programs are not for overclocking they are general programs.
Therefore I have not added in the list. IMHO we have to create a different thread for general software list or the Admins should rename the thread.
Click to expand...

:confused: i don't see orthos sp2004 on the list
 
the normal StessPrime2004 is there

orthos is a better version though, it auto detects multi-core systems and runs two instances in the same window
 
yep, that's the one :)
 
Thanks infrared again :)
I am adding some o/c forums in the bottom of the second part if I forgot someone post the proper link.
 
MRSEAN how are ya ??
ΣΚΑΠΑΝΕΑΣ ΠΡΟΣΟΧΗ !!! :)
 
Salute ΣΚΑΦΕΑΣ εδώ! :laugh:
Το στίκαραν το ρημάδι!
OK Moderators :D we don't speak rude Greek.
BTW some new forums links added in the second part.
Please post more! :)

HellasVagabond said:
Rude ???
This Is Sparta! :p
Click to expand...
Please stop spamming more.
Here is a sticky thread.
 
Last edited:
Rude ???

This Is Sparta !

:p
 
if anyone uses nvidia system utility i found a modification for the nvsuoem.ini file to allow voltage changes, you may be able to add your own nforce board but dont ask me lol,
adding AdvanceView=1 at bottom of your mb list opens advanced view but no options in it worked for me :o(
this is entire contents of my .ini file.

[NVK8-CRB]
agp_min = 1.5
agp_max = 1.7
agp_increment_step=0.1
core_min = 1.5
core_max = 1.7
core_increment_step=0.1
cpu_min = 0.8
cpu_max = 1.55
cpu_increment_step=0.025
mem_min = 1.6
mem_max = 1.8
mem_increment_step=0.1
aux_min = 1.6
aux_max = 1.7
aux_increment_step=0.1
[NVK7-CRB]
agp_min = 1.5
agp_max = 1.7
agp_increment_step=0.1
core_min = 1.5
core_max = 1.7
core_increment_step=0.1
cpu_min = 1.1
cpu_max = 1.85
cpu_increment_step=0.025
mem_min = 2.6
mem_max = 2.8
mem_increment_step=0.1
aux_min = 1.6
aux_max = 1.7
aux_increment_step=0.1

[K7N2 Delta-ILSR]
agp_min = 1.5
agp_max = 1.7
agp_increment_step=0.1
core_min = 1.5
core_max = 1.7
core_increment_step=0.1
cpu_min = 1.1
cpu_max = 1.85
cpu_increment_step=0.025
mem_min = 2.6
mem_max = 2.8
mem_increment_step=0.1

[K7N2 Delta-L]
agp_min = 1.5
agp_max = 1.7
agp_increment_step=0.1
core_min = 1.5
core_max = 1.7
core_increment_step=0.1
cpu_min = 1.1
cpu_max = 1.85
cpu_increment_step=0.025
mem_min = 2.6
mem_max = 2.8
mem_increment_step=0.1
AdvanceView=1

[K7N2G-ILSR]
agp_min = 1.5
agp_max = 1.7
agp_increment_step=0.1
core_min = 1.5
core_max = 1.7
core_increment_step=0.1
cpu_min = 1.1
cpu_max = 1.85
cpu_increment_step=0.025
mem_min = 2.6
mem_max = 2.8
mem_increment_step=0.1

[K7N2G-L]
agp_min = 1.5
agp_max = 1.7
agp_increment_step=0.1
core_min = 1.5
core_max = 1.7
core_increment_step=0.1
cpu_min = 1.1
cpu_max = 1.85
cpu_increment_step=0.025
mem_min = 2.6
mem_max = 2.8
mem_increment_step=0.1

[MiscPerformanceSettings]
CPUInternalCache=-1
CPUExternalCache=-1
AGPApertureSize=-1
SSE/SSE2Instructions=-1
AGP8X=-1
AGP2.0=-1
AGP3.0=-1
LDTSpeed=-1
 
WOW nice trick! :toast:
Thread updated!!!
 
greco ya bastage sto pspamming! XD


edit..nah im kidding. dude here works uber hard on the bible and all.hey.if i wasnt lazy id help him too :p

damn i forgot this : overclockersonline dot net . happy now? :D
 
Last edited:
Status
Not open for further replies.
Back
Top