• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

My Wolfdale finally runs 4ghz

Shou Miko

Shou Miko

Joined
Aug 29, 2005
Messages
7,524 (1.04/day)
Location
Stuck somewhere in the 80's Jpop era....
System Specs
System Name Lynni Zen | Lenowo TwinkPad L14 G2 | Tiny Tiger
Processor AMD Ryzen 7 7700 Raphael | i5-1135G7 Tiger Lake-U | i9-9900k (Turbo disaabled)
Motherboard ASRock B650M PG Riptide Bios v. 3.10 AMD AGESA 1.2.0.2a | Lenowo BDPLANAR Bios 1.68 | Lenowo M720q
Cooling AMD Wraith Cooler | Lenowo C-267C-2 | Lenowo 01MN633 (35W)
Memory Flare X5 2x16GB DDR5 6000MHZ CL36 (AMD EXPO) | Willk Elektronik 2x16GB 2666MHZ CL17 | Crucial 2x16GB
Video Card(s) Sapphire PURE AMD Radeon™ RX 9070 Gaming OC 16GB | Intel® Iris Xe Graphics | Intel® UHD Graphics 630
Storage Gigabyte M30 1TB|Sabrent Rocket 2TB| HDD: 1TB | WD RED SN700 1TB | M30 1TB\ SSD 1TB HDD: 16TB\10TB
Display(s) KTC M27T20S 1440p@165Hz | LG 48CX OLED 4K HDR | Innolux 14" 1080p
Case Asus Prime AP201 White Mesh | Lenowo L14 G2 chassis | Lenowo M720q chassis
Audio Device(s) Steelseries Arctis Pro Wireless
Power Supply Be Quiet! Pure Power 12 M 750W Goldie | Cyberpunk GaN 65W USB-C charger | Lenowo 95W slim tip
Mouse Logitech G305 Lightspeedy Wireless | Lenowo TouchPad & Logitech G305
Keyboard Ducky One 3 Daybreak Fullsize | L14 G2 UK Lumi
Software Win11 IoT Enterprise 24H2 UK | Win11 IoT Enterprise LTSC 24H2 UK / Arch (Fan)
Benchmark Scores 3DMARK: https://www.3dmark.com/3dm/89434432? GPU-Z: https://www.techpowerup.com/gpuz/details/v3zbr
a few days ago i bought a E8400 E0 and first i just pushed it up to 3,75ghz like my old C0 but this time only at 1.216v but still 500x7,5 and it was 10°C colder than my old C0 now i pushed it to 4ghz and in IntelBurnTest v2.3 the temp stops at 56°C acording to RealTemp 3.00 also with 1.216v, so i can't be happier 'cause i always wanted a 4ghz Wolfdale :) and now i run 4ghz at 535x7,5

Screen of IntelBurnTest with RealTemp and CPU-Z



and CPU-Z Validator



finally i use a Thermalright Ultra-120A with 1x120mm fan on :)
 
Very nice! :toast: You may want to run an hour of OCCT Linpack for an hour, but if your chip is anything like mine, it's stable.
 
Is there a reason for the rather low intelburn test score ? Maybe you had other progs running.

I say this as my E8200 @ 3.6 ghz & 1800fsb gets a slighty higher intelburntest score than your E8400 is getting at 4.0ghz & 2140fsb :confused:
 
2gb of RAM vs. 4gb, I'm assuming.
 
Why settle for 4.0ghz with a good chip, low temps, and a great cooler?
4.3ghz should be within reach with the low 1.3v's, if not 4.4ghz...
 
I run my E8600 at 4ghz/1.2v(in bios),it will run higher but i just dont need it clocked higher.All my games run fine at these settings so i just dont see the need to run it higher.
 
it's starting to be wierd than i run 500mhz on my memory 'cause i can do 34hours tests, game and more no shutdown but when it's at Idleling mode where it doesn't do anything but playing music, msn, mirc, realtemp and firefox it get BSOD :S (Not IRQL or less Thingy) so i reinstalled Windows 7 it said before that it was a KS1.sys or something but so now i will try memtest 'cause i can do SuperPi, Orthos and IntelBurnTest without error can it be my graphic card that's starting to fail me?
 
I need 1.38750V in bios, 1.344V in Intel Burn test to run 4014Mhz on my C0.


BTW, you should be getting 27GFlops+, thats what i get on Intel Burn Test

Batch: Q751A340


God damn E0's who made them! :laugh:
 
Last edited:
now i am trying the stock OCCT test for 1hour and see if it's fail.

Memtest86 didn't found any errors so what can it be?
 

Attachments

  • 12092009107.jpg
    12092009107.jpg
    81.8 KB · Views: 323
Try 445 x 9, 2.4 memory multiplyer with a B strap or 500 x 8 and a 2.00D multiplyer.


on 445 FSB on mine, i run Static Tread Value of 8, with 7 i get over 9000 on memory read/write/copy, more than enough
 
File_1993 said:
Try 445 x 9, 2.4 memory multiplyer with a B strap or 500 x 8 and a 2.00D multiplyer.


on 445 FSB on mine, i run Static Tread Value of 8, with 7 i get over 9000 on memory read/write/copy, more than enough
Click to expand...

could that really be the problem? i have run OCCT for about 40mins now and my temps is about 50°C acording to RealTemp so the temp should be fine and my Mushkin RedLine 2x2 PC2-8000 is being colded down by a Corsair DOMINATOR Airflow Fan and i change them to DiMM 2 & 4 instead of DiMM 1 & 3 for dual channel


and now OCCT finished without any errors :confused:
 

Attachments

  • OCCT.Test.jpg
    OCCT.Test.jpg
    101.7 KB · Views: 368
Last edited:
You could always try and experiment :)
 
You must log in or register to reply here.
Back
Top