NEW - 3DMark 11 Compilation

[fullinfusion]

Fullinfusion|R7970|1280/1605|P14073|i7 2700k @5.4GHz

 

[Durvelle27]

well the same clocks worked on the 3DMark 1.0 (2013) and all others i´ve done so far with new build...

ok finally i got it going ........

http://img.techpowerup.org/130301/3DMark11_fx-8350@4.4GHzHD7950@1000Core1375Ram.png

http://www.3dmark.com/3dm11/6217429

 

[overclocking101]

do we have one for the new 3dmark yet? I've been owning face on hwbot with my 560

 

[n0tiert]

http://www.3dmark.com/3dm11/6217429

nice score m8

 

[Durvelle27]

nice score m8

thx

 

[n0tiert]

do we have one for the new 3dmark yet? I've been owning face on hwbot with my 560

there you go

3D Mark 2013

 

[TRWOV]

TRWOV|ATi HD7870 Ref|1200/1500|7925|i5-2320 @ 3.5GHz

 

[TRWOV]

TRWOV|ATi HD7870 Ref|1000/1200|7002|i5-2320 @ 3.5GHz

 

[fullinfusion]

Fullinfusion|2xR7970|1100/1600|P16354|i7 2700k @4.8GHz

Validation HERE

Fullinfusion|2xR7970|1200/1675|P17189|i7 2700k @4.8GHz

validation HERE

 

[cadaveca]

Fullinfusion|2xR7970|1100/1600|P16354|i7 2700k @4.8GHz

Validation HERE

http://img.techpowerup.org/130323/p16k.png



Fullinfusion|2xR7970|1200/1675|P17189|i7 2700k @4.8GHz

validation HERE

http://img.techpowerup.org/130323/p17k.png

hmm, seems a bit low?


7950s, less clocks:

http://www.3dmark.com/3dm11/5315230


and http://www.3dmark.com/3dm11/4065177


bottom is not maxed yet, either. Look at 3D scores? Or maybe this is PCIE 3.0 effect? Keep tweaking!

 

[fullinfusion]

hmm, seems a bit low?


7950s, less clocks:

http://www.3dmark.com/3dm11/5315230


and http://www.3dmark.com/3dm11/4065177


bottom is not maxed yet, either. Look at 3D scores? Or maybe this is PCIE 3.0 effect? Keep tweaking!

I dont know whats up. Perhaps like you said PCI-E 3.0 vs 2.0 is the issue

In the manual it says to use pci-e slot # 1 and #3 so thats x8 x8

 

[cadaveca]

Seems we have diff drivers, too. Find what works best for ya, but I don't do any tweaks, honestly, so it's gotta be something obvious like that. Your Physics score is good, too, and I don't run the same clocks on my 3770K, 4.6 GHz only, so that should eliminate some of the IVY benefit.

Unfortunately, I can't honestly tell you what drivers that was with, other than by going what was most recent on the date I posted those scores to the ORB.

 

[fullinfusion]

Im using the 13.2 beta 7

Going to run the one card out stock and then swap it out with the other and see if its a bum card mabey

 

[cadaveca]

maybe try earlier 13.2 betas?

 

[fullinfusion]

maybe try earlier 13.2 betas?

One card, http://www.3dmark.com/3dm11/6253883

last test wasnt even running crossfire before but the other scenes seem to run fast as heck.

 

[cadaveca]

try 1050/1500. Should be around 10,500. Must be driver version. That's 16,650 is two days before Christmas, so whatever driver was out then...? I still get that, mind you. Can't remember which driver came out with the big boost in points...the first one...

I don't expect you to outscore me much, should be pretty lcose though. For me, there is no diff between my 7970s, or my 7950s. My sets even clock similar, one card better than the other.

 

[fullinfusion]

try 1050/1500. Should be around 10,500. Must be driver version. That's 16,650 is two days before Christmas, so whatever driver was out then...? I still get that, mind you. Can't remember which driver came out with the big boost in points...the first one...

I don't expect you to outscore me much, should be pretty lcose though. For me, there is no diff between my 7970s, or my 7950s. My sets even clock similar, one card better than the other.

Scored about the same with the 2nd card so It's driver related... wasn't there something on the home page a while ago about a CCC that amd let out to fix xfire problems?

What driver you suggest Dave?

 

[cadaveca]

This one:

http://www.3dmark.com/3dm11/6082224


???





Beta5, I think. Shit, maybe it was 4...

Gotta find out, gotta try with the monster:

http://www.3dmark.com/fs/105830

 

[fullinfusion]

anybody got a valid link to 13.2 beta 5?

tpu does but the link takes you to 13.2 beta 7

 

[fullinfusion]

Yup driver issue. Went to 13.2 beta 5 and stock clocks on the gpu are...

http://www.3dmark.com/3dm11/6254091

 

[fullinfusion]

hmm, seems a bit low?

http://www.3dmark.com/3dm11/5315230



bottom is not maxed yet, either. Look at 3D scores? Or maybe this is PCIE 3.0 effect? Keep tweaking!

Tessellation is turned off on that mark. I'll turn mine off and see what I get.

Ran same clocks and got this with Tess OFF.

http://www.3dmark.com/3dm11/6254259

A run with same clocks with Tessellation on.

http://www.3dmark.com/3dm11/6254279

 

[cadaveca]

Tessellation is turned off on that mark. I'll turn mine off and see what I get.

Ran same clocks and got this with Tess OFF.

http://www.3dmark.com/3dm11/6254259

A run with same clocks with Tessellation on.

http://www.3dmark.com/3dm11/6254279

Whoops!

try this?

http://www.3dmark.com/3dm11/6054947


or this:

http://www.3dmark.com/3dm11/6054889

 

[DOM]

Tessellation is turned off on that mark. I'll turn mine off and see what I get.

Ran same clocks and got this with Tess OFF.

http://www.3dmark.com/3dm11/6254259

A run with same clocks with Tessellation on.

http://www.3dmark.com/3dm11/6254279

got this same gpu clocks cpu 4.5 mem 2400 13.3 beta3

http://www.3dmark.com/3dm11/6257396

 

[Mydog]

Mydog|2xR7970|1150/1500|P17855|i7 3960X @4.7GHz

 

[Mydog]

Mydog|2x 7970|1250/1600|P19067|i7 3960X @4.9GHz

A little higher clocks on this one

Validation link