New build doesn’t work

[phil.jack1979]

Hey all! I’ve just attempted my first build, and there is no display showing up on my monitor. I’ve tried putting the HDMI cable into the motherboard and directly into the GPU to no avail. I’ve even switched the slot for the GPU. Nothing. My components are as follows:
Motherboard- STRIX B550-F Gaming WIFI II
GPU- GEFORCE RTX 360
CPU- Rising 7 AMD
Power Supply- ES1000
64 gigs RAM

 

[3x0]

Check which debug led lights up on the motherboard

 

[lightning70]

Connect an additional jumper or check the fault LEDs on the motherboard, as the number and pattern of beeps explains the fault.

 

[phil.jack1979]

Ok, I have a white led for the VGA. Does this mean my brand new graphics card is bad? It is fitted correctly.

Check which debug led lights up on the motherboard

The VGA is lit. Need a new motherboard?

Check which debug led lights up on the motherboard

Also, no CPU light or DRAM

 

[CrAsHnBuRnXp]

Make sure the power cable plugged into the video card is in all the way. Also make sure youre using the correct input on the monitor. You said you were using HDMI, so make sure the input on the monitor is set to HDMI and not Display Port.

 

[phil.jack1979]

Make sure the power cable plugged into the video card is in all the way. Also make sure youre using the correct input on the monitor. You said you were using HDMI, so make sure the input on the monitor is set to HDMI and not Display Port.

Check and check. No problems there.

 

[ir_cow]

I see you have 64GB of ram. Start with 2 sticks and see if it works.

 

[mama]

Does your video card light up/have power?

 

[phil.jack1979]

Check and check. No problems there.

Thank you

I see you have 64GB of ram. Start with 2 sticks and see if it works.

same problem. Thank you.

Does your video card light up/have power?

Yes.

 

[mama]

Check all your cables (unplug and plug). Reseat the ram. What is your monitor?

 

[ir_cow]

What does the debug leds stop on?

 

[AMF]

. Your power supply is junk.. never never use cheap or no name psu u have been warned........... Seasonic SSR-1000PD ULTRA PRIME 1000W the main board cpuand gpu and memory will thank you

 

[The King]

Should definitely try with 2 DIMM sticks in slot A2 and B2 has suggested above.

If your Ryzen CPU is not a G series with an IGP then you will not get any display from the onboard motherboard.

Also make sure to try all the ports on the back of the card. Some of these ports seem to not display unless they get into windows
which is weird and you dont see the BIOS screen. Also try using another cable if you have one available.

Looking at the GPU pics again your card maybe not fully inserted in the PCIe slot properly.

 

[Calmmo]

Try your old GPU see if it posts with it and also update the mobo bios with flashback via usb

 

[Eskimonster]

It happens a lot that the gpu needs to be set too primary display, as motherboard allocate the igpu for primary display.
When that have happened to me, i need to use the connector from motherboard output to the screen, and not the grafik card.
Then i go too bios and change the setup, thereafter i change cable back to the GPU and stuff works.

Pardon for the engrish.