• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Nvidia CMP 100-210 or 100HX (GV100 GPU)

Joined
Jul 15, 2019
Messages
489 (0.28/day)
Location
Hungary
System Name Detox sleeper
Processor Intel i9-7980XE@4,5Ghz
Motherboard Asrock x299 Taichi XE (custom bios with ecc reg support, old microcode)
Cooling Custom water: Alphacool XT45 1080 + 9xArctic P12, EK-D5 pump combo, EK Velocity D-RGB block
Memory 8x16Gb Hynix DJR ECC REG 3200@4000
Video Card(s) Intel Arc A770 LE 16Gb + CMP 100-210 (Tesla V100 16Gb)
Storage Samsung PM9A1 1Tb + PM981 512Gb + Kingston HyperX 480Gb + Samsung Evo 860 500Gb
Display(s) HP ZR30W (30" 2560x1600)
Case Chieftec 1E0-500A-CT04 + AMD Sempron sticker + Titan fan controller
Audio Device(s) Genius Cavimanus
Power Supply Super Flower Leadex 750w Platinum
Mouse Logitech G400
Keyboard Dell Oem + Focus Fk2000 plus
Software Windows 11 Pro x64
I bought this card from ebay. So this topic is about the CMP 100-200/210
My card was cheap (160usd)
First this is a dedicated mining card so expect a few or a lot limiations compared to the retail gv100 cards,but still usable.
For drivers we can use the newest TitanV or the Tesla/Grid drivers (switchable wddm/tcc mode)
It uses the 8 pin EPS but i got an eps to 8pin pcie adapter.

The spec:

139440_x7jfgbx463hqzr84_titanvdriver.jpg



I have tested a few things:
Fooocus and stable diffusion works well aprox 2080ti/3070 performance, the tensor cores are working but lower clocks than the tesla v100
Kobold cpp works in cuda mode.

Pcie is limited to 1.1 1x (dont know that is a hw or sw limitation)
So gaming performance is very limited and the modell upload is slow.
Double precision compute is limited.

TDP set to 250w but it is maxed out at 190w. It runs at 60c max.

Overclock is possible with msi afterburner, but it is not stable at the v100 32gb clocks.
139440_gzq5j9nm9eiwahn3_v1001 (1).jpg



For cooling i use a cheap blower fan from a dell sff pc.

20240328_175925.jpg20240328_180022.jpg20240328_180012.jpg
20240328_200401.jpg
20240328_200409.jpg

Pcie 1x mode reason is the missing smd.

20240331_131601.jpg
20240331_132207.jpg
 
Last edited:
Joined
Apr 1, 2024
Messages
2 (0.13/day)
Location
USA
System Name Workstation Pi
Processor Ryzen 9 7950X
Motherboard MSI X670-P Wifi
Cooling Noctua NH-D15
Memory Corsair Vengence RGB 192 GB 5600 Mhz (5200 Mhz Stable)
Video Card(s) 2x Nvidia Titan V 12 GB+ Nvidia Tesla P100 16 GB
Storage 2x 2TB SkHynix Platinum P41 + 1TB Kingston A2000 + 1TB Samsung 860
Display(s) 34" 3440x1440p 100Hz
Case Fractal Design Pop Air XL
Power Supply Corsair RM1000x
Mouse Razer Viper 8KHz
Keyboard Razer Deathstalker V2 Pro
VR HMD Valve Index + Oculus Rift CV1 + Oculus Quest 2
Software Windows 11 + Ubuntu + Centos
Hi, it is nice to see another post made on these card, as there is not much information on them. I was curious how did you got SD working on tensor cores, as when I was attempting to run it (my results here in the discussion on ServetheHome website), it only gave me performance similar to P100 that I also had. For me the double precision was a bummer, as that was my biggest interest, but if the tensor cores are working and I just had a bad setup then it still looks like a great card.

With the missing SMD, maybe if they get soldered back on it might enable higher PCIE than 1x, I can look into it and buy them to test it out. All of them with initial multimeter measurements seem like 50 MOhm SMD. I will remeasure it later with my second multimeter to check. If this card can be modded with solderig to gain additional pcie lines than it might be decent for even gaming as the FP32 performance is not cut.

With the drivers, have you performed any modifications to them, or followed the same modification procedure by adding the card to the drivers.

Lastly I do hope that the bios flash program gets patched for these, as if flashing V100 would unlock further abilities of this card, and soldering the SMDs would exapnd the PCIe lanes, then it would turn from decent card into an amazing one, especially for the money (the prices though rose on ebay as they are now around 310$).

Also not sure if it will be useful to anyone but here are some bare board pictures of the CMP100-210.
IMG_6662 (1).JPG

IMG_6663.JPG
 
Last edited:
Joined
Jul 15, 2019
Messages
489 (0.28/day)
Location
Hungary
System Name Detox sleeper
Processor Intel i9-7980XE@4,5Ghz
Motherboard Asrock x299 Taichi XE (custom bios with ecc reg support, old microcode)
Cooling Custom water: Alphacool XT45 1080 + 9xArctic P12, EK-D5 pump combo, EK Velocity D-RGB block
Memory 8x16Gb Hynix DJR ECC REG 3200@4000
Video Card(s) Intel Arc A770 LE 16Gb + CMP 100-210 (Tesla V100 16Gb)
Storage Samsung PM9A1 1Tb + PM981 512Gb + Kingston HyperX 480Gb + Samsung Evo 860 500Gb
Display(s) HP ZR30W (30" 2560x1600)
Case Chieftec 1E0-500A-CT04 + AMD Sempron sticker + Titan fan controller
Audio Device(s) Genius Cavimanus
Power Supply Super Flower Leadex 750w Platinum
Mouse Logitech G400
Keyboard Dell Oem + Focus Fk2000 plus
Software Windows 11 Pro x64
SD tensorRT extension installed. Enabled, disabled and again enabled.
3 it/s disabled 7-8 it/s when enabled

Loading TensorRT engine: T:\AI\stable-diffusion-webui\models\Unet-trt\v1-5-pruned-emaonly_d7049739_cc70_sample=2x4x64x64-timesteps=2-encoder_hidden_states=2x77x768.trt

Loaded Profile: 0
sample = [(2, 4, 64, 64), (2, 4, 64, 64), (2, 4, 64, 64)]
timesteps = [(2,), (2,), (2,)]
encoder_hidden_states = [(2, 77, 768), (2, 77, 768), (2, 77, 768)]
latent = [(2, 4, 64, 64), (2, 4, 64, 64), (2, 4, 64, 64)]

100%|██████████████████████████████████████████████████████████████████████████████████| 20/20 [00:02<00:00, 7.84it/s]
Total progress: 30it [07:30, 15.00s/it]
100%|██████████████████████████████████████████████████████████████████████████████████| 20/20 [00:02<00:00, 7.71it/s]
Total progress: 100%|██████████████████████████████████████████████████████████████████| 20/20 [00:02<00:00, 6.71it/s]
100%|██████████████████████████████████████████████████████████████████████████████████| 20/20 [00:02<00:00, 7.30it/s]
Total progress: 100%|██████████████████████████████████████████████████████████████████| 20/20 [00:02<00:00, 6.88it/s]
Dectivating unet: [TRT] v1-5-pruned-emaonly████████████████████████████████████████████| 20/20 [00:02<00:00, 8.02it/s]
100%|██████████████████████████████████████████████████████████████████████████████████| 20/20 [00:06<00:00, 2.93it/s]
Total progress: 100%|██████████████████████████████████████████████████████████████████| 20/20 [00:06<00:00, 2.94it/s]
Activating unet: [TRT] v1-5-pruned-emaonly█████████████████████████████████████████████| 20/20 [00:06<00:00, 3.01it/s]
Loading TensorRT engine: T:\AI\stable-diffusion-webui\models\Unet-trt\v1-5-pruned-emaonly_d7049739_cc70_sample=2x4x64x64-timesteps=2-encoder_hidden_states=2x77x768.trt

Loaded Profile: 0
sample = [(2, 4, 64, 64), (2, 4, 64, 64), (2, 4, 64, 64)]
timesteps = [(2,), (2,), (2,)]
encoder_hidden_states = [(2, 77, 768), (2, 77, 768), (2, 77, 768)]
latent = [(2, 4, 64, 64), (2, 4, 64, 64), (2, 4, 64, 64)]

100%|██████████████████████████████████████████████████████████████████████████████████| 20/20 [00:02<00:00, 7.88it/s]
Total progress: 100%|██████████████████████████████████████████████████████████████████| 20/20 [00:02<00:00, 6.85it/s]
Total progress: 100%|██████████████████████████████████████████████████████████████████| 20/20 [00:02<00:00, 8.00it/s]
 
Joined
May 8, 2016
Messages
1,741 (0.60/day)
System Name BOX
Processor Core i7 6950X @ 4,26GHz (1,28V)
Motherboard X99 SOC Champion (BIOS F23c + bifurcation mod)
Cooling Thermalright Venomous-X + 2x Delta 38mm PWM (Push-Pull)
Memory Patriot Viper Steel 4000MHz CL16 4x8GB (@3240MHz CL12.12.12.24 CR2T @ 1,48V)
Video Card(s) Titan V (~1650MHz @ 0.77V, HBM2 1GHz, Forced P2 state [OFF])
Storage WD SN850X 2TB + Samsung EVO 2TB (SATA) + Seagate Exos X20 20TB (4Kn mode)
Display(s) LG 27GP950-B
Case Fractal Design Meshify 2 XL
Audio Device(s) Motu M4 (audio interface) + ATH-A900Z + Behringer C-1
Power Supply Seasonic X-760 (760W)
Mouse Logitech RX-250
Keyboard HP KB-9970
Software Windows 10 Pro x64
Try to find [CUDA : Force P2 state] option under NVidia Profile Inspector, and set it to [OFF].
This should help with performance under some of compute workloads.

Does V/F curve control work ?
If they do, try setting ~1620MHz at 0.85V and see if it helps on power throttle side.

PS. x1 3.0 WILL limit performance A LOT, regardless of what you plan to do with it.
Good thing those caps are standard ceramic ones (no polarity), just "borrow" few of them from another (or dead) PCI-e 3.0 card (that has similar sized ones).
 
Joined
Jul 15, 2019
Messages
489 (0.28/day)
Location
Hungary
System Name Detox sleeper
Processor Intel i9-7980XE@4,5Ghz
Motherboard Asrock x299 Taichi XE (custom bios with ecc reg support, old microcode)
Cooling Custom water: Alphacool XT45 1080 + 9xArctic P12, EK-D5 pump combo, EK Velocity D-RGB block
Memory 8x16Gb Hynix DJR ECC REG 3200@4000
Video Card(s) Intel Arc A770 LE 16Gb + CMP 100-210 (Tesla V100 16Gb)
Storage Samsung PM9A1 1Tb + PM981 512Gb + Kingston HyperX 480Gb + Samsung Evo 860 500Gb
Display(s) HP ZR30W (30" 2560x1600)
Case Chieftec 1E0-500A-CT04 + AMD Sempron sticker + Titan fan controller
Audio Device(s) Genius Cavimanus
Power Supply Super Flower Leadex 750w Platinum
Mouse Logitech G400
Keyboard Dell Oem + Focus Fk2000 plus
Software Windows 11 Pro x64
Képernyőkép 2024-04-01 132314.pngKépernyőkép 2024-04-01 144855.pngKépernyőkép 2024-04-01 145257.pngKépernyőkép 2024-04-01 145822.pngKépernyőkép 2024-04-01 192023.pngKépernyőkép 2024-04-01 191640.pngKépernyőkép 2024-04-01 204537.pngKépernyőkép 2024-04-01 204932.pngKépernyőkép 2024-04-01 210118.png
 
Last edited:
Joined
Jul 15, 2019
Messages
489 (0.28/day)
Location
Hungary
System Name Detox sleeper
Processor Intel i9-7980XE@4,5Ghz
Motherboard Asrock x299 Taichi XE (custom bios with ecc reg support, old microcode)
Cooling Custom water: Alphacool XT45 1080 + 9xArctic P12, EK-D5 pump combo, EK Velocity D-RGB block
Memory 8x16Gb Hynix DJR ECC REG 3200@4000
Video Card(s) Intel Arc A770 LE 16Gb + CMP 100-210 (Tesla V100 16Gb)
Storage Samsung PM9A1 1Tb + PM981 512Gb + Kingston HyperX 480Gb + Samsung Evo 860 500Gb
Display(s) HP ZR30W (30" 2560x1600)
Case Chieftec 1E0-500A-CT04 + AMD Sempron sticker + Titan fan controller
Audio Device(s) Genius Cavimanus
Power Supply Super Flower Leadex 750w Platinum
Mouse Logitech G400
Keyboard Dell Oem + Focus Fk2000 plus
Software Windows 11 Pro x64
The missing SMD-s on the pcie line is 200-220 nF capacitors. I will solder them back.

For driver i use the Quadro GV100
Superposition only runs in windowed mode and lags a little at the begining but i think the scores a bugged.
Temperatures not reported correctly.
Képernyőkép 2024-04-02 165732.png


Képernyőkép 2024-04-02 170933.png
 
Last edited:
Joined
May 8, 2016
Messages
1,741 (0.60/day)
System Name BOX
Processor Core i7 6950X @ 4,26GHz (1,28V)
Motherboard X99 SOC Champion (BIOS F23c + bifurcation mod)
Cooling Thermalright Venomous-X + 2x Delta 38mm PWM (Push-Pull)
Memory Patriot Viper Steel 4000MHz CL16 4x8GB (@3240MHz CL12.12.12.24 CR2T @ 1,48V)
Video Card(s) Titan V (~1650MHz @ 0.77V, HBM2 1GHz, Forced P2 state [OFF])
Storage WD SN850X 2TB + Samsung EVO 2TB (SATA) + Seagate Exos X20 20TB (4Kn mode)
Display(s) LG 27GP950-B
Case Fractal Design Meshify 2 XL
Audio Device(s) Motu M4 (audio interface) + ATH-A900Z + Behringer C-1
Power Supply Seasonic X-760 (760W)
Mouse Logitech RX-250
Keyboard HP KB-9970
Software Windows 10 Pro x64
Here's Cuda-z from my Titan V (PCI-e 2.0 x16 limited :/) :
Cuda-Z.png
^Highest F/V point : 1665MHz @ 0.8V

Superposition with F/V curve, no VRAM OC (in fullscreen) :
Superposition 4k X99 mini.png

1080p extreme (window mode) :
Superposition 1080p Extreme X99 mini.png
^Yes, 1080 extreme is heavier GPU wise than 4k optimised.
 
Last edited:

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
25,838 (3.79/day)
Location
Alabama
System Name Rocinante
Processor I9 14900KS
Motherboard EVGA z690 Dark KINGPIN (modded BIOS)
Cooling EK-AIO Elite 360 D-RGB
Memory 64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 500GB 980 Pro | 1x 1TB 980 Pro | 1x 8TB Corsair MP400
Display(s) Odyssey OLED G9 G95SC
Case Lian Li o11 Evo Dynamic White
Audio Device(s) Moondrop S8's on Schiit Hel 2e
Power Supply Bequiet! Power Pro 12 1500w
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD Quest 3
Software Windows 11
Benchmark Scores I dont have time for that.
The missing SMD-s on the pcie line is 200-220 nF capacitors. I will solder them back.
Excited to know how that goes. Keep us in the loop!
 
Joined
Jul 15, 2019
Messages
489 (0.28/day)
Location
Hungary
System Name Detox sleeper
Processor Intel i9-7980XE@4,5Ghz
Motherboard Asrock x299 Taichi XE (custom bios with ecc reg support, old microcode)
Cooling Custom water: Alphacool XT45 1080 + 9xArctic P12, EK-D5 pump combo, EK Velocity D-RGB block
Memory 8x16Gb Hynix DJR ECC REG 3200@4000
Video Card(s) Intel Arc A770 LE 16Gb + CMP 100-210 (Tesla V100 16Gb)
Storage Samsung PM9A1 1Tb + PM981 512Gb + Kingston HyperX 480Gb + Samsung Evo 860 500Gb
Display(s) HP ZR30W (30" 2560x1600)
Case Chieftec 1E0-500A-CT04 + AMD Sempron sticker + Titan fan controller
Audio Device(s) Genius Cavimanus
Power Supply Super Flower Leadex 750w Platinum
Mouse Logitech G400
Keyboard Dell Oem + Focus Fk2000 plus
Software Windows 11 Pro x64
New 2x2 220nF 16V 0402 X7R SMD caps.
I still get 1x mode. So it is a bios limit.
I searching for board straps or some documentation.
14326_s9vwrrprko0ccakr_1000029848.jpg
 
Top