• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

OCZ Unveils Vector 180 Performance SSD

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,725 (7.42/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
OCZ unveiled its flagship 2.5-inch SATA SSD, the Vector 180. Built to offer both performance and high write-endurance, the Vector 180 is based on the company's new Barefoot 3 M00 controller, in its highest performance turning. This controller is wired to Toshiba A19 MLC NAND flash chips, with 50 GB/day write endurance rating.

The Vector 180 comes in capacities of 240 GB, 480 GB, and 960 GB; offering sequential transfer rates of up to 550 MB/s reads, with up to 530 MB/s writes; and up to 100,000 IOPS 4K random reads, with up to 95,000 IOPS 4K random writes. Other features include power failure management, and the company's flexible 5-year ShieldPlus warranty.



View at TechPowerUp Main Site
 
I'm liking those IOP figures.
 
Whats the point of producing a bit faster sata drive, if pci-e express is just around the corner.
 
Whats the point of producing a bit faster sata drive, if pci-e express is just around the corner.

Because a single percentile of the market has PCI-E M.2 slots, where as 95%+ of the market still uses SATA III (And will for a year or more).
 
Because a single percentile of the market has PCI-E M.2 slots, where as 95%+ of the market still uses SATA III (And will for a year or more).

Still, differences are negligible nowdays in the topend. They should just focus on pci-e stuff instead
 
Back
Top