• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

(omg)vflash | Fully Patched nvflash from X to Ada Lovelace [v5.780]

  • Thread starter Thread starter Deleted member 218758
  • Start date Start date
rusTORK said:
It's fine. I know about their 450W XOC too. I thought maybe something i missed or something made for XOC overclockers, but it's pretty much GALAX 1000W BIOS for LN2. I am not THAT extreme. =)

3DMark hate me anyway. Solar Bay they accept result, but Port Royal - nope.

Thanks anyway! Focus on (omg)vflash then. ;)
Click to expand...
Increasing the power cap puts too much stress on the VRM, resulting in more clock dips. So, at this point, it's probably best not to increase the core power/voltage cap to full. :)
 
zxTheWolfxz said:
I noticed my Tesla GP100.rom saved from the card is 271KB and the Quadro is 257KB.
Would the size make a difference when trying to flash and make it fail?
Click to expand...
If you read the bios through GPU-Z, then it only reads the area containing some data. Ignoring the empty area.

In other words, the BIOS chip itself can have a volume of 1, 2 or 4 MB.

And in some cases, 2MB of BIOS-data can be stored on a 32MB chip. The rest of the BIOS-memory is just empty.
 
zxTheWolfxz said:
This is what I'm working with and only QuadroGP100.rom I could find at TPU.
I noticed my Tesla GP100.rom saved from the card is 271KB and the Quadro is 257KB.
Would the size make a difference when trying to flash and make it fail?
Wondering if it might need some padding.
Click to expand...
There is a difference in INFOROM. :D
GP100.rom (you Inforom), Quadro (Contains modified info from another card)
Your card should recover its inforom after flashing and rebooting.

See Inforom from you card to quadro ;):
 

Attachments

Last edited:
ostermark said:
2: Is it posible to raise the power limit on the 1650 as it is limited to 75w eventhough it is connected to a 6-pin connector?
Click to expand...
PCIE 3.0, 4.0 = up 75 Watts
6-pin = up 75 Watts
75+75 - need card = near 120 Watts. :)


Veii said:
CID rebrand is not functional for now (for quite a few cards already).
Click to expand...
Trying to flash a rtx 2080S into a quadro rtx 4000 :D:D:D

OMGVflash:
Command id: 0x30000005 Command: NV_UCODE_CMD_COMMAND_EWR failed
Command Status: NV_UCODE_CMD_STS_COMPLETE
Error Code = 0x0000005A(90): NV_UCODE_ERR_CODE_DEVID_MATCH_LIST_DEVID_MATCH_FAILED
Device ID in the rom image does not match the device ID in the chip.
Update aborted, please use a rom image that supports device ID 0x1E81.
Falcon CLOSE

nvflashk:
Command id: 0x30000005 Command: NV_UCODE_CMD_COMMAND_EWR failed
Command Status: NV_UCODE_CMD_STS_COMPLETE
Error Code = 0x0000005A(90): NV_UCODE_ERR_CODE_DEVID_MATCH_LIST_DEVID_MATCH_FAILED
Device ID in the rom image does not match the device ID in the chip.
Update aborted, please use a rom image that supports device ID 0x1E81.

MvFlash 5.692.0:
WARNING: Firmware image PCI Subsystem ID (10DE.12A0)
does not match adapter PCI Subsystem ID (10DE.13A1).
WARNING: None of the firmware image compatible Board ID's
match the Board ID of the adapter.
Adapter Board ID: 0166
Firmware image Board ID: 0094
NOTE: Exception caught.
Nothing changed!

NvFlash 5.780.0 (Official NVIDIA FLASH):
Command id: 0x30000005 Command: NV_UCODE_CMD_COMMAND_EWR failed
Command Status: NV_UCODE_CMD_STS_COMPLETE
Error Code = 0x0000005A(90): NV_UCODE_ERR_CODE_DEVID_MATCH_LIST_DEVID_MATCH_FAILED
Device ID in the rom image does not match the device ID in the chip.
Update aborted, please use a rom image that supports device ID 0x1E81.
Falcon CLOSE
 
Last edited:
Wotwow said:
PCIE 3.0, 4.0 = up 75 Watts
6-pin = up 75 Watts
75+75 - need card = near 120 Watts. :)

Im aware of this, but when stresstesting with 100% powerlimit GPU-< reads board power draw to max 75watts with restricts overclocking alot
Click to expand...
 
Im aware of this, but when stresstesting with 100% powerlimit GPU-< reads board power draw to max 75watts with restricts overclocking alot
- Manufacturers take care of you so that your system is stable. I also have a second card. I only use it for Physx. :D
 
detegting gpu vailed
RTX3060 ti lhr

detekting gpu not work
 

Attachments

  • Screenshot 2023-08-27 214552.png
    Screenshot 2023-08-27 214552.png
    34.7 KB · Views: 153
420frodo said:
the same error

I throw the card now on the trash and hoole an xbox is too stupid for me
Click to expand...
Uninstall device in device manager + uninstall driver Reboot your computer and try to flash it again if you have the original BIOS and restart your computer again.
If you do not understand what you are doing, then you need to carry it in for repair for flashing with a hardware programmer.
 
Wotwow said:
Uninstall device in device manager + uninstall driver Reboot your computer and try to flash it again if you have the original BIOS and restart your computer again.
If you do not understand what you are doing, then you need to carry it in for repair for flashing with a hardware programmer.
Click to expand...
the same error
 
sorry it's really the same error and I actually know myself from the device id mod is just not functional it's just a miserable mod so sorry I'm just like 90 percent of the users here have more errors than success when you think about it the vnios flash can brick a graphics card is that as flawed as the tool is almost bad to publish if you consider that the success is not even 5% with exactly the same boar it would be better if he gave up the development before he ended it someone sued

Wotwow said:
Cooler Bot und coole Bots...:D
Click to expand...
Sorry, it's really the same error, and I actually know it from the device ID mod. It just doesn't work. It's just a miserable mod. So I'm sorry that 90 percent of users here have more failure than success, thinking about the vnios considering that the success with the exact same boar is not even 5%, it would be better if he abandoned development before finishing it, and someone sued

Wotwow​

​

MSI RTX 3060 Ti 8 GB gaming x dual fan is my board lhr​

the vbios that i want to flash is :

MSI RTX 3060 Ti 8 GB gaming x trio this is exactly the same board only with 50 watts more power target​


nvflashk is the same fake
 

Attachments

  • Screenshot 2023-08-27 232707.png
    Screenshot 2023-08-27 232707.png
    46.2 KB · Views: 170
Last edited:
Wotwow said:
OK. ;)
This version FALCON_GSP ready to be used. ;)

P.S.
Veii try my version (You said you were interested in new information)? :)
Click to expand...
Looks like we need to implement the board ID/ PCI ID/ subsystem ID bypass in the version of NVFlash you posted. Tested out on my 2070 Super to cross-flash to 2080 Super and device ID mismatch is stopping it from processing the flash. I've got a backup GPU, so willing to be the guinea pig.
 
rootuser123 said:
Looks like we need to implement the board ID/ PCI ID/ subsystem ID bypass in the version of NVFlash you posted. Tested out on my 2070 Super to cross-flash to 2080 Super and device ID mismatch is stopping it from processing the flash. I've got a backup GPU, so willing to be the guinea pig.
Click to expand...
bad.jpg


What is highlighted in red cannot be bypassed by the firmware.
We need to try to open the functions from the quadro and by default slightly increase the power and boost. :D

As far as I know, you can try to flash 2080 to 2080TI and vice versa.
But flashing the 2080S will not work anywhere. these processors are overclocked.
The most relish is when the driver turns on the additional cache and the amount of caching of the video card, but I tried the tools and they don’t flash information for me. ;)
I can change the amount of memory on the boards from 16 to 8, then the same effect opens. But I have a lot of work to do to sort out certificate fixes.

Veii doesn't want to leak secrets.
Nobody wants..
Veii asked for secrets, I added a driver that works with GSP.
Until now, there is a problem with certificates even for RTX Turing.
:D
 
Last edited:
Wotwow said:
View attachment 310941

What is highlighted in red cannot be bypassed by the firmware.
We need to try to open the functions from the quadro and by default slightly increase the power and boost. :D

As far as I know, you can try to flash 2080 to 2080TI and vice versa.
But flashing the 2080S will not work anywhere. these processors are overclocked.
The most relish is when the driver turns on the additional cache and the amount of caching of the video card, but I tried the tools and they don’t flash information for me.
I can change the amount of memory on the boards from 16 to 8, then the same effect opens. But I have a lot of work to do to sort out certificate fixes.

Veii doesn't want to leak secrets.
Nobody wants..
Veii asked for secrets, I added a driver that works with GSP.
Until now, there is a problem with certificates even for RTX Turing.
:D
Click to expand...

The 2080 uses TU104 while the 2080 Ti uses TU102, 2 different chips. 2080S is based on TU104.
 
You must log in or register to reply here.
Back
Top